This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
Log of /googlecode.com/svn/trunk/meteord
Parent Directory
|
Revision Log
Revision
62 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Nov 27 00:33:21 2008 UTC
(15 years, 5 months ago)
by
andrew.betts
File length: 9135 byte(s)
Diff to
previous 59
,
to
selected 11
1 Fixed: Added SIGPIPE handler. We noticed that under heavy load
Meteor receives SIGPIPEs from the OS, suspected to relate to clients
that have just disconnected the moment Meteor attempts to write to the
socket. This caused Meteor to crash.
2 Fixed: Long polling multiple channels no longer causes the loop to
die and restart when some channels have messages queued for delivery.
3 Fixed: Over time, Meteor 'collected' connections from clients that
never got disconnected even if MaxTime was set. This happened if the
client concerned sent a header with no terminating blank line. Meteor
kept waiting for the rest of the header, which never arrived, and
therefore the client remained in limbo, never subjected to the MaxTime
time limit because it had not yet become a subscriber. Clients are
now allowed 30 seconds to send a valid request header.
4 Fixed: If only one message existed on the server, the JS client
would continue to request it again and again, because it has message
ID 0, and the JS client considered this an invalid message ID.
5 Fixed: Corrected some comments in file headers
6 Changed: MaxMessages has been renamed to CloseOnEvent and functions
in a similar, but not quite identical way. Thanks to Matthew Haak,
who pointed out the extreme confusingness of MaxMessages and a bug
that has resulted in Fix 2 above. Setting CloseOnEvent to any value
that evaluates to true will cause Meteor to close subscriber
connections after at least one message has been sent and there are no
further messages pending. This is identical to MaxMessages for values
of 0 and 1, but where MaxMessages is set to a value higher than one,
replacing it with CloseOnEvent with the same value will act as though
it were set to one. The intent of MaxMessages was to enable long-
polling (and it is used by the JS client in that way), and
CloseonEvent is a drop in replacement for that behaviour.
7 Changed: Meteor JS client now uses dynamic <SCRIPT> tags for all
polling behaviours, rather than XHR. This enables it to make poll
requests cross-domain (see 13)
8 Changed: Meteor JS client now abstracts timestamp lookups to a
dedicated method.
9 Changed: Default HeaderTemplates no longer include cache busting
headers, since all meteor requests contain a millisecond timestamp and
so no client makes the same request twice. These were therefore
simply chewing up bandwidth.
10 Changed: Date strings used for logging debug messages are cached to
avoid numerous expensive lookups to localtime().
11 Changed: Channel info is only sent in a response if the client does
not request a restart from a specified ID. The logic being that if
the client knows the ID they want to start from, they have already
made previous requests and have the channel information they need.
Bandwidth saving measure.
12 Added: JS client now has a Meteor.isSupportedBrowser() method,
which you can call to detemine whether Meteor will run in the user's
browser version.
13 Added: JS client can now use different hosts for polling and
streaming. This is only really useful if your website is on a domain
that has a lot of cookies, and you don't want to send them in every
poll request. Removing cookies from request headers can reduce the
size of the request significantly. We find that with cookies included
Meteor poll requests are usually larger than the responses. To use,
set Meteor.pollhost. Meteor.pollhost can be any domain, while
Meteor.host must be a subdomain of your website hostname.
14 Added: Config file now supports new 'FooterTemplate' parameter, for
a string to send just before the connection to the subscriber is
closed. This is in support of change 7.
15 Added: Better inline documentation for ChannelInfoTemplate config
parameter
16 Added: Log output includes connection IDs corresponding to the file
inode for each connection
17 Added: New controller command LISTCONNECTIONS, produces a newline
delimited list of all currently connected clients, and for each one
displaying "ConnectionID IPAddress ClientType [SubscriberID]"
18 Added: New controller command DESCRIBE, takes a ConnectionID as a
parameter, and outputs numerous statistics about that particular
client, including number of messages sent/received, user agent, IP
address, time connected, time remaining until MaxTime etc.
19 Added: New controller comment LISTSUBSCRIBERS, produces a newline
delimited list of all currently connected streaming subscribers, and
for each one displaying "SubscriberID IPAddress Starttime TimeLimit
TimeRemaining MessageCount UserAgent"
20 Added: SHOWSTATS command produces the following additional stats:
connection_count: total current connections, real_subscribers: total
of number of currently connected streaming subscribers plus the number
of unique polling connections seen in the last 60 seconds.
21 Added: STDERR outputs prior to every exit() for debugging purposes
22 Added: The UDP server is now considered stable, and is the best way
of broadcasting messages to lots of Meteor nodes simultaneously and
efficiently.
Revision
55 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Feb 28 00:21:39 2008 UTC
(16 years, 2 months ago)
by
andrew.betts
File length: 8876 byte(s)
Diff to
previous 54
,
to
selected 11
Fixed: Made eof() work properly
Added nocache querystring param and modified Subscriber.pm to allow it
Rewrote stream.html to ensure we capture the last chunk of data before a reset
Incremented version
Revision
53 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Feb 27 21:58:56 2008 UTC
(16 years, 2 months ago)
by
andrew.betts
File length: 8876 byte(s)
Diff to
previous 52
,
to
selected 11
Updated version number
JS client:
Added channel info handler to JS client, assumes Meteor will send <script>ch('channel', msgid);</script>
Allowed processing of messages prior to current message index
Added disconnect() to eof()
Revert to poll mode if unable to load frame (should fix IE proxy issues)
Server:
Fixed output of channel info to show only subscribed channels (and simplified)
Added logging of IP addresses
Revision
49 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Feb 4 22:30:35 2008 UTC
(16 years, 3 months ago)
by
knops.gerd
File length: 8876 byte(s)
Diff to
previous 48
,
to
selected 11
• Removed support for numbered header templates and hard coded persist values, use new mode support instead
Revision
47 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Feb 4 21:06:42 2008 UTC
(16 years, 3 months ago)
by
knops.gerd
File length: 7731 byte(s)
Diff to
previous 46
,
to
selected 11
• syslog change: If `SyslogFacility` is set to `none`, meteord will not put itself into the background and print all syslog messages with a priority higher than `debug` to standard output. The output will be prefixed with a timestamp (unix time in seconds) and a tab character.
• New syslog messges: joinchannel, leavechannel, document
Revision
46 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Feb 4 19:24:25 2008 UTC
(16 years, 3 months ago)
by
knops.gerd
File length: 7618 byte(s)
Diff to
previous 45
,
to
selected 11
• The ADDMESSAGE response now follows the `OK` with a tab character and the message ID for the newly added message
Revision
45 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Feb 4 19:02:49 2008 UTC
(16 years, 3 months ago)
by
knops.gerd
File length: 7618 byte(s)
Diff to
previous 42
,
to
selected 11
• Mode-specific configurations
• New ~channelinfo~ header keyword
• New ChannelInfoTemplate parameter
Revision
42 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Sun Feb 3 23:10:24 2008 UTC
(16 years, 3 months ago)
by
knops.gerd
File length: 7581 byte(s)
Diff to
previous 25
,
to
selected 11
• meteord will return it's version number and exit if any command line parameter is '-v', '-version' or anything in between
Revision
25 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Sun May 20 19:40:53 2007 UTC
(17 years ago)
by
knops.gerd
File length: 7377 byte(s)
Diff to
previous 11
• Add simple statistics, available via new SHOWSTATS controller command
Revision
11 -
(
view)
(
annotate)
-
[selected]
Modified
Thu Dec 14 16:29:42 2006 UTC
(17 years, 5 months ago)
by
knops.gerd
File length: 7285 byte(s)
Diff to
previous 9
• Change CRLF line endings back to LF only
This form allows you to request diffs between any two revisions of this file.
For each of the two "sides" of the diff,
enter a numeric revision.