/[mdap]/etc/udhcpd.conf
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /etc/udhcpd.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 62 - (show annotations)
Sat Nov 17 00:12:12 2007 UTC (16 years, 4 months ago) by dpavlin
File size: 2934 byte(s)
 r85@brr:  root | 2007-11-17 01:11:48 +0100
 tweak config

1 # Sample udhcpd configuration file (/etc/udhcpd.conf)
2
3 # The start and end of the IP lease block
4
5 start 10.0.1.1 #default: 192.168.0.20
6 end 10.0.1.254 #default: 192.168.0.254
7
8
9 # The interface that udhcpd will use
10
11 interface eth1 #default: eth0
12
13
14 # The maximim number of leases (includes addressesd reserved
15 # by OFFER's, DECLINE's, and ARP conficts
16
17 max_leases 254 #default: 254
18
19
20 # If remaining is true (default), udhcpd will store the time
21 # remaining for each lease in the udhcpd leases file. This is
22 # for embedded systems that cannot keep time between reboots.
23 # If you set remaining to no, the absolute time that the lease
24 # expires at will be stored in the dhcpd.leases file.
25
26 remaining yes #default: yes
27
28
29 # The time period at which udhcpd will write out a dhcpd.leases
30 # file. If this is 0, udhcpd will never automatically write a
31 # lease file. (specified in seconds)
32
33 auto_time 60 #default: 7200 (2 hours)
34
35
36 # The amount of time that an IP will be reserved (leased) for if a
37 # DHCP decline message is received (seconds).
38
39 decline_time 90 #default: 3600 (1 hour)
40
41
42 # The amount of time that an IP will be reserved (leased) for if an
43 # ARP conflct occurs. (seconds
44
45 #conflict_time 3600 #default: 3600 (1 hour)
46
47
48 # How long an offered address is reserved (leased) in seconds
49
50 #offer_time 60 #default: 60 (1 minute)
51
52 # If a lease to be given is below this value, the full lease time is
53 # instead used (seconds).
54
55 #min_lease 60 #defult: 60
56
57
58 # The location of the leases file
59
60 lease_file etc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
61
62 # The location of the pid file
63 pidfile etc/udhcpd.pid #default: /var/run/udhcpd.pid
64
65 # Everytime udhcpd writes a leases file, the below script will be called.
66 # Useful for writing the lease file to flash every few hours.
67
68 #notify_file #default: (no script)
69
70 #notify_file dumpleases # <--- usefull for debugging
71
72 # The following are bootp specific options, setable by udhcpd.
73
74 #siaddr 10.0.0.100 #default: 0.0.0.0
75
76 #sname zorak #default: (none)
77
78 #boot_file /var/nfs_root #default: (none)
79
80 # The remainer of options are DHCP options and can be specifed with the
81 # keyword 'opt' or 'option'. If an option can take multiple items, such
82 # as the dns option, they can be listed on the same line, or multiple
83 # lines. The only option with a default is 'lease'.
84
85 #Examles
86 #opt dns 192.168.10.2 192.168.10.10
87 option subnet 255.0.0.0
88 opt router 10.0.0.100
89 #opt wins 192.168.10.10
90 #option dns 129.219.13.81 # appened to above DNS servers for a total of 3
91 #option domain local
92 #option lease 864000 # 10 days of seconds
93 #option lease 90
94
95
96 # Currently supported options, for more info, see options.c
97 #opt subnet
98 #opt timezone
99 #opt router
100 #opt timesvr
101 #opt namesvr
102 #opt dns
103 #opt logsvr
104 #opt cookiesvr
105 #opt lprsvr
106 #opt bootsize
107 #opt domain
108 #opt swapsvr
109 #opt rootpath
110 #opt ipttl
111 #opt mtu
112 #opt broadcast
113 #opt wins
114 #opt lease
115 #opt ntpsrv
116 opt tftp foobar
117 #opt bootfile
118 #opt wpad

  ViewVC Help
Powered by ViewVC 1.1.26