2 |
|
|
3 |
Written by Dobrica Pavlinusic <dpavlin@rot13.org> |
Written by Dobrica Pavlinusic <dpavlin@rot13.org> |
4 |
|
|
5 |
|
Your CPE firmware images goes to /srv/tftp/ |
6 |
|
|
7 |
|
^^ Setup upsing stand-alone services |
8 |
|
|
9 |
|
Install udhcpd and tftpd-hpa and run network-setup.sh script to start all required services. |
10 |
|
|
11 |
|
^^ Setup using inetd |
12 |
|
|
13 |
|
Install tftpd and dhcpd, this setup is depriciated, but still useful |
14 |
|
|
15 |
^ setup tftp /etc/inetd.conf |
^ setup tftp /etc/inetd.conf |
16 |
|
|
17 |
tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd /srv/tftp |
tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd /srv/tftp |
33 |
Special care should be taken with dhcpd server. It complains about unknown IP classes and doesn't |
Special care should be taken with dhcpd server. It complains about unknown IP classes and doesn't |
34 |
start. Also, there is intentional very small limit on IP lease time which should plenty enough |
start. Also, there is intentional very small limit on IP lease time which should plenty enough |
35 |
for ants to reflash because it takes ~ 3 min at most. |
for ants to reflash because it takes ~ 3 min at most. |
36 |
|
|