1 |
/* |
2 |
* Copyright (C) 2003-2005 Anders Gavare. All rights reserved. |
3 |
* |
4 |
* Redistribution and use in source and binary forms, with or without |
5 |
* modification, are permitted provided that the following conditions are met: |
6 |
* |
7 |
* 1. Redistributions of source code must retain the above copyright |
8 |
* notice, this list of conditions and the following disclaimer. |
9 |
* 2. Redistributions in binary form must reproduce the above copyright |
10 |
* notice, this list of conditions and the following disclaimer in the |
11 |
* documentation and/or other materials provided with the distribution. |
12 |
* 3. The name of the author may not be used to endorse or promote products |
13 |
* derived from this software without specific prior written permission. |
14 |
* |
15 |
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
16 |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
17 |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
18 |
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
19 |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
20 |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
21 |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
22 |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
23 |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
24 |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
25 |
* SUCH DAMAGE. |
26 |
* |
27 |
* |
28 |
* $Id: dev_turbochannel.c,v 1.40 2005/02/18 06:19:19 debug Exp $ |
29 |
* |
30 |
* Generic framework for TURBOchannel devices, used in DECstation machines. |
31 |
*/ |
32 |
|
33 |
#include <stdio.h> |
34 |
#include <stdlib.h> |
35 |
#include <string.h> |
36 |
|
37 |
#include "devices.h" |
38 |
#include "machine.h" |
39 |
#include "memory.h" |
40 |
#include "misc.h" |
41 |
#include "sfbreg.h" |
42 |
|
43 |
|
44 |
struct turbochannel_data { |
45 |
int slot_nr; |
46 |
uint64_t baseaddr; |
47 |
uint64_t endaddr; |
48 |
int irq; |
49 |
|
50 |
int rom_skip; |
51 |
|
52 |
char device_name[9]; /* NUL-terminated */ |
53 |
|
54 |
/* These should be terminated with spaces */ |
55 |
char card_firmware_version[8]; |
56 |
char card_vendor_name[8]; |
57 |
char card_module_name[8]; |
58 |
char card_firmware_type[4]; |
59 |
}; |
60 |
|
61 |
|
62 |
/* |
63 |
* dev_turbochannel_access(): |
64 |
*/ |
65 |
int dev_turbochannel_access(struct cpu *cpu, struct memory *mem, |
66 |
uint64_t relative_addr, unsigned char *data, size_t len, |
67 |
int writeflag, void *extra) |
68 |
{ |
69 |
struct turbochannel_data *d = extra; |
70 |
uint64_t idata = 0, odata = 0; |
71 |
|
72 |
idata = memory_readmax64(cpu, data, len); |
73 |
|
74 |
relative_addr += d->rom_skip; |
75 |
|
76 |
if (writeflag == MEM_READ) { |
77 |
debug("[ turbochannel: read from slot %i addr 0x%08lx (", |
78 |
d->slot_nr, (long)relative_addr); |
79 |
|
80 |
relative_addr &= 0x7fff; |
81 |
|
82 |
switch (relative_addr) { |
83 |
case 0x3e0: |
84 |
odata = 0x00000001; debug("ROM width"); |
85 |
break; |
86 |
case 0x3e4: |
87 |
odata = 0x00000004; debug("ROM stride"); |
88 |
break; |
89 |
case 0x3e8: |
90 |
/* 8KB * romsize */ |
91 |
odata = 0x00000001; debug("ROM size"); |
92 |
break; |
93 |
case 0x3ec: |
94 |
/* 4MB * slotsize */ |
95 |
odata = 0x00000001; debug("slot size"); |
96 |
break; |
97 |
case 0x3f0: |
98 |
odata = 0x55555555; debug("ROM signature byte 0"); |
99 |
break; |
100 |
case 0x3f4: |
101 |
odata = 0x00000000; debug("ROM signature byte 1"); |
102 |
break; |
103 |
case 0x3f8: |
104 |
odata = 0xaaaaaaaa; debug("ROM signature byte 2"); |
105 |
break; |
106 |
case 0x3fc: |
107 |
odata = 0xffffffff; debug("ROM signature byte 3"); |
108 |
break; |
109 |
case 0x470: |
110 |
/* 0=nothing, 1=parity */ |
111 |
odata = 0x00000000; debug("flags"); break; |
112 |
default: |
113 |
if (relative_addr >= 0x400 && relative_addr < 0x420) |
114 |
odata = d->card_firmware_version[ |
115 |
(relative_addr-0x400)/4]; |
116 |
else if (relative_addr >= 0x420 && |
117 |
relative_addr < 0x440) |
118 |
odata = d->card_vendor_name[ |
119 |
(relative_addr-0x420)/4]; |
120 |
else if (relative_addr >= 0x440 && |
121 |
relative_addr < 0x460) |
122 |
odata = d->card_module_name[ |
123 |
(relative_addr-0x440)/4]; |
124 |
else if (relative_addr >= 0x460 && |
125 |
relative_addr < 0x470) |
126 |
odata = d->card_firmware_type[ |
127 |
(relative_addr-0x460)/4]; |
128 |
else { |
129 |
debug("?"); |
130 |
} |
131 |
} |
132 |
|
133 |
/* |
134 |
* If this slot is empty, return an error so that a DBE |
135 |
* exception is caused. (This is the way DECstation operating |
136 |
* systems have to detect the absence of cards in a |
137 |
* TURBOchannel slot.) |
138 |
* |
139 |
* NOTE: The Sprite kernel reads from offsets 0x3e0..0x400 |
140 |
* without handling the DBE exception, and both Ultrix and |
141 |
* NetBSD seem to detect the DBE exception using addresses |
142 |
* around offset 0x0 or 0x3c0000. This code seems to work |
143 |
* with all of the those OS kernels: |
144 |
*/ |
145 |
if (d->card_module_name[0] == ' ') { |
146 |
/* Return no data for empty slot: */ |
147 |
odata = 0; |
148 |
|
149 |
/* Return DBE exception in some cases: */ |
150 |
if (relative_addr < 0x3e0 || relative_addr >= 0x500) |
151 |
return 0; |
152 |
} |
153 |
|
154 |
debug(") ]\n"); |
155 |
} else { |
156 |
/* debug("[ turbochannel: write to 0x%08lx: 0x%08x ]\n", |
157 |
(long)relative_addr, (int)idata); */ |
158 |
} |
159 |
|
160 |
if (writeflag == MEM_READ) |
161 |
memory_writemax64(cpu, data, len, odata); |
162 |
|
163 |
return 1; |
164 |
} |
165 |
|
166 |
|
167 |
/* |
168 |
* dev_turbochannel_init(): |
169 |
* |
170 |
* This is a generic turbochannel card device. device_name should point |
171 |
* to a string such as "PMAG-BA". |
172 |
* |
173 |
* TODO: When running for example dual-head, maybe the name of each |
174 |
* framebuffer should include the card slot number? |
175 |
*/ |
176 |
void dev_turbochannel_init(struct machine *machine, struct memory *mem, |
177 |
int slot_nr, uint64_t baseaddr, uint64_t endaddr, |
178 |
char *device_name, int irq) |
179 |
{ |
180 |
struct vfb_data *fb; |
181 |
struct turbochannel_data *d; |
182 |
int rom_offset = 0x3c0000; |
183 |
int rom_length = DEV_TURBOCHANNEL_LEN; |
184 |
int rom_skip = 0; |
185 |
char *name2; |
186 |
|
187 |
if (device_name == NULL) |
188 |
return; |
189 |
|
190 |
if (strlen(device_name) > 8) { |
191 |
fprintf(stderr, "dev_turbochannel_init(): bad device_name\n"); |
192 |
exit(1); |
193 |
} |
194 |
|
195 |
d = malloc(sizeof(struct turbochannel_data)); |
196 |
if (d == NULL) { |
197 |
fprintf(stderr, "out of memory\n"); |
198 |
exit(1); |
199 |
} |
200 |
memset(d, 0, sizeof(struct turbochannel_data)); |
201 |
d->slot_nr = slot_nr; |
202 |
d->baseaddr = baseaddr; |
203 |
d->endaddr = endaddr; |
204 |
d->irq = irq; |
205 |
|
206 |
strcpy(d->device_name, device_name); |
207 |
|
208 |
strncpy(d->card_firmware_version, "V5.3a ", 8); |
209 |
strncpy(d->card_vendor_name, "DEC ", 8); |
210 |
strncpy(d->card_firmware_type, "TCF0", 4); |
211 |
|
212 |
memset(d->card_module_name, ' ', 8); |
213 |
strncpy(d->card_module_name, device_name, strlen(device_name)); |
214 |
|
215 |
/* |
216 |
* According to NetBSD/pmax: |
217 |
* |
218 |
* PMAD-AA: le1 at tc0 slot 2 offset 0x0: address 00:00:00:00:00:00 |
219 |
* PMAG-AA: mfb0 at tc0 slot 2 offset 0x0: 1280x1024x8 |
220 |
* PMAG-BA: cfb0 at tc0 slot 2 offset 0x0cfb0: 1024x864x8 |
221 |
* PMAG-CA: px0 at tc0 slot 2 offset 0x0: 2D, 4x1 stamp, 8 plane |
222 |
* (PMAG-DA,EA,FA,FB are also pixelstamps) |
223 |
* PMAG-DV: xcfb0 at tc0 slot 2 offset 0x0: 1024x768x8 |
224 |
* PMAG-JA: "truecolor" in Ultrix |
225 |
* PMAGB-BA: sfb0 at tc0 slot 0 offset 0x0: 0x0x8 |
226 |
* PMAGB-VA: sfb0 at tc0 slot 2 offset 0x0: 0x0x8 |
227 |
* PMAZ-AA: asc0 at tc0 slot 2 offset 0x0: NCR53C94, 25MHz, SCSI ID 7 |
228 |
* |
229 |
* PMAF-FA: fta0 at tc0 slot 0 (fddi network, "DEC", "V1.0b") |
230 |
*/ |
231 |
|
232 |
if (strcmp(device_name, "PMAD-AA")==0) { |
233 |
/* le in NetBSD, Lance ethernet */ |
234 |
dev_le_init(machine, mem, baseaddr, 0, 0, irq, DEV_LE_LENGTH); |
235 |
/* One ROM at 0x1c03e0, and one at 0x3c0000. */ |
236 |
rom_skip = 0x300; |
237 |
rom_offset = 0x1c0000; |
238 |
rom_length = 0x201000; |
239 |
} else if (strcmp(device_name, "PMAZ-AA")==0) { |
240 |
/* asc in NetBSD, SCSI */ |
241 |
dev_asc_init(machine, mem, baseaddr, irq, d, |
242 |
DEV_ASC_DEC, NULL, NULL); |
243 |
rom_offset = 0xc0000; |
244 |
/* There is a copy at 0x0, at least that's where Linux |
245 |
looks for the rom signature */ |
246 |
} else if (strcmp(device_name, "PMAG-AA")==0) { |
247 |
/* mfb in NetBSD */ |
248 |
fb = dev_fb_init(machine, mem, baseaddr + VFB_MFB_VRAM, |
249 |
VFB_GENERIC, 1280, 1024, 2048, 1024, 8, device_name, 1); |
250 |
/* bt455 = palette, bt431 = cursor */ |
251 |
dev_bt455_init(mem, baseaddr + VFB_MFB_BT455, fb); |
252 |
dev_bt431_init(mem, baseaddr + VFB_MFB_BT431, fb, 8); |
253 |
rom_offset = 0; |
254 |
} else if (strcmp(device_name, "PMAG-BA")==0) { |
255 |
/* cfb in NetBSD */ |
256 |
fb = dev_fb_init(machine, mem, baseaddr, VFB_GENERIC, |
257 |
1024,864, 1024,1024,8, device_name, 1); |
258 |
dev_bt459_init(machine, mem, baseaddr + VFB_CFB_BT459, |
259 |
baseaddr + 0x300000, fb, 8, irq, BT459_BA); |
260 |
/* ROM at both 0x380000 and 0x3c0000? */ |
261 |
rom_offset = 0x380000; |
262 |
rom_length = 0x080000; |
263 |
} else if (strcmp(device_name, "PMAGB-BA")==0) { |
264 |
/* sfb in NetBSD */ |
265 |
/* TODO: This is not working with Ultrix yet. */ |
266 |
fb = dev_fb_init(machine, mem, baseaddr + SFB_OFFSET_VRAM, |
267 |
VFB_GENERIC, 1280,1024, 1280,1024,8, device_name, 1); |
268 |
dev_sfb_init(machine, mem, baseaddr + SFB_ASIC_OFFSET, fb); |
269 |
/* TODO: the CLEAR doesn't get through, as the address |
270 |
range is already in use by the asic */ |
271 |
dev_bt459_init(machine, mem, baseaddr + SFB_OFFSET_BT459, |
272 |
baseaddr + SFB_CLEAR, fb, 8, irq, BT459_BBA); |
273 |
rom_offset = 0x0; /* ? TODO */ |
274 |
} else if (strcmp(device_name, "PMAG-CA")==0) { |
275 |
/* px in NetBSD */ |
276 |
dev_px_init(machine, mem, baseaddr, DEV_PX_TYPE_PX, irq); |
277 |
rom_offset = 0x3c0000; |
278 |
} else if (strcmp(device_name, "PMAG-DA")==0) { |
279 |
/* pxg in NetBSD */ |
280 |
dev_px_init(machine, mem, baseaddr, DEV_PX_TYPE_PXG, irq); |
281 |
rom_offset = 0x3c0000; |
282 |
} else if (strcmp(device_name, "PMAG-EA")==0) { |
283 |
/* pxg+ in NetBSD: TODO (not supported by the kernel |
284 |
I've tried) */ |
285 |
fatal("TODO (see dev_turbochannel.c)\n"); |
286 |
rom_offset = 0x3c0000; |
287 |
} else if (strcmp(device_name, "PMAG-FA")==0) { |
288 |
/* "pxg+ Turbo" in NetBSD */ |
289 |
dev_px_init(machine, mem, baseaddr, |
290 |
DEV_PX_TYPE_PXGPLUSTURBO, irq); |
291 |
rom_offset = 0x3c0000; |
292 |
} else if (strcmp(device_name, "PMAG-DV")==0) { |
293 |
/* xcfb in NetBSD: TODO */ |
294 |
fb = dev_fb_init(machine, mem, baseaddr + 0x2000000, |
295 |
VFB_DEC_MAXINE, 0, 0, 0, 0, 0, "PMAG-DV", 1); |
296 |
/* TODO: not yet usable, needs a IMS332 vdac */ |
297 |
rom_offset = 0x3c0000; |
298 |
} else if (strcmp(device_name, "PMAG-JA")==0) { |
299 |
/* "Truecolor", mixed 8- and 24-bit */ |
300 |
dev_pmagja_init(machine, mem, baseaddr, irq); |
301 |
rom_offset = 0; /* NOTE: 0, not 0x3c0000 */ |
302 |
} else if (strcmp(device_name, "PMAG-RO")==0) { |
303 |
/* This works at least B/W in Ultrix, so far. */ |
304 |
fb = dev_fb_init(machine, mem, baseaddr + 0x200000, |
305 |
VFB_GENERIC, 1280,1024, 1280,1024, 8, "PMAG-RO", 1); |
306 |
/* TODO: bt463 at offset 0x040000, not bt459 */ |
307 |
dev_bt459_init(machine, mem, baseaddr + 0x40000, 0, |
308 |
fb, 8, irq, 0); /* TODO: type */ |
309 |
dev_bt431_init(mem, baseaddr + 0x40010, fb, 8); /* cursor */ |
310 |
rom_offset = 0x3c0000; |
311 |
} else if (device_name[0] == '\0') { |
312 |
/* If this slot is empty, then occupy the entire |
313 |
4MB slot address range: */ |
314 |
rom_offset = 0; |
315 |
rom_length = 4*1048576; |
316 |
} else { |
317 |
fatal("warning: unknown TURBOchannel device name \"%s\"\n", |
318 |
device_name); |
319 |
} |
320 |
|
321 |
d->rom_skip = rom_skip; |
322 |
|
323 |
name2 = malloc(strlen(device_name) + 30); |
324 |
if (name2 == NULL) { |
325 |
fprintf(stderr, "out of memory in dev_turbochannel_init()\n"); |
326 |
exit(1); |
327 |
} |
328 |
if (*device_name) |
329 |
sprintf(name2, "turbochannel [%s]", device_name); |
330 |
else |
331 |
sprintf(name2, "turbochannel"); |
332 |
|
333 |
memory_device_register(mem, name2, baseaddr + rom_offset + rom_skip, |
334 |
rom_length-rom_skip, dev_turbochannel_access, d, MEM_DEFAULT, NULL); |
335 |
} |
336 |
|