Parent Directory | Revision Log
Links to HEAD: | (view) (annotate) |
Sticky Revision: |
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1515 2007/04/14 05:39:46 debug Exp $ 20070324 Adding a "--debug" option to the configure script, to disable optimizations in unstable development builds. Moving out SCSI-specific stuff from diskimage.c into a new diskimage_scsicmd.c. Applying Hĺvard Eidnes' patch for SCSICDROM_READ_DISKINFO and SCSICDROM_READ_TRACKINFO. (Not really tested yet.) Implementing disk image "overlays" (to allow simple roll-back to previous disk state). Adding a 'V' disk flag for this, and updating the man page and misc.html. 20070325 Stability fix to cpu_dyntrans.c, when multiple physical pages share the same initial table entry. (The ppp == NULL check should be physpage_ofs == 0.) Bug found by analysing GXemul against a version patched for Godson. Fixing a second occurance of the same problem (also in cpu_dyntrans.c). Fixing a MAJOR physical page leak in cpu_dyntrans.c; pages weren't _added_ to the set of translated pages, they _replaced_ all previous pages. It's amazing that this bug has been able to live for this long. (Triggered when emulating >128MB RAM.) 20070326 Removing the GDB debugging stub support; it was too hackish and ugly. 20070328 Moving around some native code generation skeleton code. 20070329 The -lm check in the configure script now also checks for sin() in addition to sqrt(). (Thanks to Nigel Horne for noticing that sqrt was not enough on Fedora Core 6.) (Not verified yet.) 20070330 Fixing an indexing bug in dev_sh4.c, found by using gcc version 4.3.0 20070323. 20070331 Some more experimentation with native code generation. 20070404 Attempting to fix some more SH4 SCIF interrupt bugs; rewriting the SH interrupt assertion/deassertion code somewhat. 20070410 Splitting src/file.c into separate files in src/file/. Cleanup: Removing the dummy TS7200, Walnut, PB1000, and Meshcube emulation modes, and dev_epcom and dev_au1x00. Removing the experimental CHIP8/RCA180x code; it wasn't really working much lately, anyway. It was fun while it lasted. Also removing the experimental Transputer CPU support. 20070412 Moving the section about how the dynamic translation system works from intro.html to a separate translation.html file. Minor SH fixes; attempting to get OpenBSD/landisk to run without randomly bugging out, but no success yet. 20070413 SH SCI (serial bit interface) should now work together with a (new) RS5C313 clock device (for Landisk emulation). 20070414 Moving Redhat/MIPS down from supported to experimental, in guestoses.html. Preparing for a new release; doing some regression testing etc. ============== RELEASE 0.4.5 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1480 2007/02/19 01:34:42 debug Exp $ 20061029 Changing usleep(1) calls in the debugger to usleep(10000) 20061107 Adding a new disk image option (-d o...) which sets the ISO9660 filesystem base offset; also making some other hacks to allow NetBSD/dreamcast and homebrew demos/games to boot directly from a filesystem image. Moving Dreamcast-specific stuff in the documentation to its own page (dreamcast.html). Adding a border to the Dreamcast PVR framebuffer. 20061108 Adding a -T command line option (again?), for halting the emulator on unimplemented memory accesses. 20061109 Continuing on various SH4 and Dreamcast related things. The emulator should now halt on more unimplemented device accesses, instead of just printing a warning, forcing me to actually implement missing stuff :) 20061111 Continuing on SH4 and Dreamcast stuff. Adding a bogus Landisk (SH4) machine mode. 20061112 Implementing some parts of the Dreamcast GDROM device. With some ugly hacks, NetBSD can (barely) mount an ISO image. 20061113 NetBSD/dreamcast now starts booting from the Live CD image, but crashes randomly quite early on in the boot process. 20061122 Beginning on a skeleton interrupt.h and interrupt.c for the new interrupt subsystem. 20061124 Continuing on the new interrupt system; taking the first steps to attempt to connect CPUs (SuperH and MIPS) and devices (dev_cons and SH4 timer interrupts) to it. Many things will probably break from now on. 20061125 Converting dev_ns16550, dev_8253 to the new interrupt system. Attempting to begin to convert the ISA bus. 20061130 Incorporating a patch from Brian Foley for the configure script, which checks for X11 libs in /usr/X11R6/lib64 (which is used on some Linux systems). 20061227 Adding a note in the man page about booting from Dreamcast CDROM images (i.e. that no external kernel is needed). 20061229 Continuing on the interrupt system rewrite: beginning to convert more devices, adding abort() calls for legacy interrupt system calls so that everything now _has_ to be rewritten! Almost all machine modes are now completely broken. 20061230 More progress on removing old interrupt code, mostly related to the ISA bus + devices, the LCA bus (on AlphaBook1), and the Footbridge bus (for CATS). And some minor PCI stuff. Connecting the ARM cpu to the new interrupt system. The CATS, NetWinder, and QEMU_MIPS machine modes now work with the new interrupt system :) 20061231 Connecting PowerPC CPUs to the new interrupt system. Making PReP machines (IBM 6050) work again. Beginning to convert the GT PCI controller (for e.g. Malta and Cobalt emulation). Some things work, but not everything. Updating Copyright notices for 2007. 20070101 Converting dev_kn02 from legacy style to devinit; the 3max machine mode now works with the new interrupt system :-] 20070105 Beginning to convert the SGI O2 machine to the new interrupt system; finally converting O2 (IP32) devices to devinit, etc. 20070106 Continuing on the interrupt system redesign/rewrite; KN01 (PMAX), KN230, and Dreamcast ASIC interrupts should work again, moving out stuff from machine.h and devices.h into the corresponding devices, beginning the rewrite of i80321 interrupts, etc. 20070107 Beginning on the rewrite of Eagle interrupt stuff (PReP, etc). 20070117 Beginning the rewrite of Algor (V3) interrupts (finally changing dev_v3 into devinit style). 20070118 Removing the "bus" registry concept from machine.h, because it was practically meaningless. Continuing on the rewrite of Algor V3 ISA interrupts. 20070121 More work on Algor interrupts; they are now working again, well enough to run NetBSD/algor. :-) 20070122 Converting VR41xx (HPCmips) interrupts. NetBSD/hpcmips can be installed using the new interrupt system :-) 20070123 Making the testmips mode work with the new interrupt system. 20070127 Beginning to convert DEC5800 devices to devinit, and to the new interrupt system. Converting Playstation 2 devices to devinit, and converting the interrupt system. Also fixing a severe bug: the interrupt mask register on Playstation 2 is bitwise _toggled_ on writes. 20070128 Removing the dummy NetGear machine mode and the 8250 device (which was only used by the NetGear machine). Beginning to convert the MacPPC GC (Grand Central) interrupt controller to the new interrupt system. Converting Jazz interrupts (PICA61 etc.) to the new interrupt system. NetBSD/arc can be installed again :-) Fixing the JAZZ timer (hardcoding it at 100 Hz, works with NetBSD and it is better than a completely dummy timer as it was before). Converting dev_mp to the new interrupt system, although I haven't had time to actually test it yet. Completely removing src/machines/interrupts.c, cpu_interrupt and cpu_interrupt_ack in src/cpu.c, and src/include/machine_interrupts.h! Adding fatal error messages + abort() in the few places that are left to fix. Converting dev_z8530 to the new interrupt system. FINALLY removing the md_int struct completely from the machine struct. SH4 fixes (adding a PADDR invalidation in the ITLB replacement code in memory_sh.c); the NetBSD/dreamcast LiveCD now runs all the way to the login prompt, and can be interacted with :-) Converting the CPC700 controller (PCI and interrupt controller for PM/PPC) to the new interrupt system. 20070129 Fixing MACE ISA interrupts (SGI IP32 emulation). Both NetBSD/ sgimips' and OpenBSD/sgi's ramdisk kernels can now be interacted with again. 20070130 Moving out the MIPS multi_lw and _sw instruction combinations so that they are auto-generated at compile time instead. 20070131 Adding detection of amd64/x86_64 hosts in the configure script, for doing initial experiments (again :-) with native code generation. Adding a -k command line option to set the size of the dyntrans cache, and a -B command line option to disable native code generation, even if GXemul was compiled with support for native code generation for the specific host CPU architecture. 20070201 Experimenting with a skeleton for native code generation. Changing the default behaviour, so that native code generation is now disabled by default, and has to be enabled by using -b on the command line. 20070202 Continuing the native code generation experiments. Making PCI interrupts work for Footbridge again. 20070203 More native code generation experiments. Removing most of the native code generation experimental code, it does not make sense to include any quick hacks like this. Minor cleanup/removal of some more legacy MIPS interrupt code. 20070204 Making i80321 interrupts work again (for NetBSD/evbarm etc.), and fixing the timer at 100 Hz. 20070206 Experimenting with removing the wdc interrupt slowness hack. 20070207 Lowering the number of dyntrans TLB entries for MIPS from 192 to 128, resulting in a minor speed improvement. Minor optimization to the code invalidation routine in cpu_dyntrans.c. 20070208 Increasing (experimentally) the nr of dyntrans instructions per loop from 60 to 120. 20070210 Commenting out (experimentally) the dyntrans_device_danger detection in memory_rw.c. Changing the testmips and baremips machines to use a revision 2 MIPS64 CPU by default, instead of revision 1. Removing the dummy i960, IA64, x86, AVR32, and HP PA-RISC files, the PC bios emulation, and the Olivetti M700 (ARC) and db64360 emulation modes. 20070211 Adding an "mp" demo to the demos directory, which tests the SMP functionality of the testmips machine. Fixing PReP interrupts some more. NetBSD/prep now boots again. 20070216 Adding a "nop workaround" for booting Mach/PMAX to the documentation; thanks to Artur Bujdoso for the values. Converting more of the MacPPC interrupt stuff to the new system. Beginning to convert BeBox interrupts to the new system. PPC603e should NOT have the PPC_NO_DEC flag! Removing it. Correcting BeBox clock speed (it was set to 100 in the NetBSD bootinfo block, but should be 33000000/4), allowing NetBSD to start without using the (incorrect) PPC_NO_DEC hack. 20070217 Implementing (slow) AltiVec vector loads and stores, allowing NetBSD/macppc to finally boot using the GENERIC kernel :-) Updating the documentation with install instructions for NetBSD/macppc. 20070218-19 Regression testing for the release. ============== RELEASE 0.4.4 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1325 2006/08/15 15:38:37 debug Exp $ 20060723 More Transputer instructions (pfix, nfix, opr, mint, ldl, ldlp, eqc, rev, ajw, stl, stlf, sthf, sub, ldnl, ldnlp, ldpi, move, wcnt, add, bcnt). Adding more SPARC instructions (andcc, addcc, bl, rdpr). Progress on the igsfb framebuffer used by NetBSD/netwinder. Enabling 8-bit fills in dev_fb. NetBSD/netwinder 3.0.1 can now run from a disk image :-) 20060724 Cleanup/performance fix for 64-bit virtual translation table updates (by removing the "timestamp" stuff). A full NetBSD/pmax 3.0.1 install for R4400 has dropped from 667 seconds to 584 :) Fixing the igsfb "almost vga" color (it is 24-bit, not 18-bit). Adding some MIPS instruction combinations (3*lw, and 3*addu). The 8048 keyboard now turns off interrupt enable between the KBR_ACK and the KBR_RSTDONE, to work better with Linux 2.6. Not causing PPC DEC interrupts if PPC_NO_DEC is set for a specific CPU; NetBSD/bebox gets slightly further than before. Adding some more SPARC instructions: branches, udiv. 20060725 Refreshing dev_pckbc.c a little. Cleanups for the SH emulation mode, and adding the first "compact" (16-bit) instructions: various simple movs, nop, shll, stc, or, ldc. 20060726 Adding dummy "pcn" (AMD PCnet NIC) PCI glue. 20060727 Various cleanups; removing stuff from cpu.h, such as running_translated (not really meaningful anymore), and page flags (breaking into the debugger clears all translations anyway). Minor MIPS instruction combination updates. 20060807 Expanding the 3*sw and 3*lw MIPS instruction combinations to work with 2* and 4* too, resulting in a minor performance gain. Implementing a usleep hack for the RM52xx/MIPS32/MIPS64 "wait" instruction (when emulating 1 cpu). 20060808 Experimenting with some more MIPS instruction combinations. Implementing support for showing a (hardcoded 12x22) text cursor in igsfb. 20060809 Simplifying the NetBSD/evbmips (Malta) install instructions somewhat (by using a NetBSD/pmax ramdisk install kernel). 20060812 Experimenting more with the MIPS 'wait' instruction. PCI configuration register writes can now be handled, which allow PCI IDE controllers to work with NetBSD/Malta 3.0.1 and NetBSD/cobalt 3.0.1. (Previously only NetBSD 2.1 worked.) 20060813 Updating dev_gt.c based on numbers from Alec Voropay, to enable Linux 2.6 to use PCI on Malta. Continuing on Algor interrupt stuff. 20060814 Adding support for routing ISA interrupts to two different interrupts, making it possible to run NetBSD/algor :-) 20060814-15 Testing for the release. ============== RELEASE 0.4.2 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1121 2006/02/18 21:03:08 debug Exp $ 20051126 Cobalt and PReP now work with the 21143 NIC. Continuing on Alpha dyntrans things. Fixing some more left-shift-by-24 to unsigned. 20051127 Working on OpenFirmware emulation; major cleanup/redesign. Progress on MacPPC emulation: NetBSD detects two CPUs (when running with -n 2), framebuffer output (for text) works. Adding quick-hack Bandit PCI controller and "gc" interrupt controller for MacPPC. 20051128 Changing from a Bandit to a Uni-North controller for macppc. Continuing on OpenFirmware and MacPPC emulation in general (obio controller, and wdc attached to the obio seems to work). 20051129 More work on MacPPC emulation (adding a dummy ADB controller). Continuing the PCI bus cleanup (endianness and tag composition) and rewriting all PCI controllers' access functions. 20051130 Various minor PPC dyntrans optimizations. Manually inlining some parts of the framebuffer redraw routine. Slowly beginning the conversion of the old MIPS emulation into dyntrans (but this will take quite some time to get right). Generalizing quick_pc_to_pointers. 20051201 Documentation update (David Muse has made available a kernel which simplifies Debian/DECstation installation). Continuing on the ADB bus controller. 20051202 Beginning a rewrite of the Zilog serial controller (dev_zs). 20051203 Continuing on the zs rewrite (now called dev_z8530); conversion to devinit style. Reworking some of the input-only vs output-only vs input-output details of src/console.c, better warning messages, and adding a debug dump. Removing the concept of "device state"; it wasn't really used. Changing some debug output (-vv should now be used to show all details about devices and busses; not shown during normal startup anymore). Beginning on some SPARC instruction disassembly support. 20051204 Minor PPC updates (WALNUT skeleton stuff). Continuing on the MIPS dyntrans rewrite. More progress on the ADB controller (a keyboard is "detected" by NetBSD and OpenBSD). Downgrading OpenBSD/arc as a guest OS from "working" to "almost working" in the documentation. Progress on Algor emulation ("v3" PCI controller). 20051205 Minor updates. 20051207 Sorting devices according to address; this reduces complexity of device lookups from O(n) to O(log n) in memory_rw (but no real performance increase (yet) in experiments). 20051210 Beginning the work on native dyntrans backends (by making a simple skeleton; so far only for Alpha hosts). 20051211 Some very minor SPARC updates. 20051215 Fixing a bug in the MIPS mul (note: not mult) instruction, so it also works with non-64-bit emulation. (Thanks to Alec Voropay for noticing the problem.) 20051216 More work on the fake/empty/simple/skeleton/whatever backend; performance doesn't increase, so this isn't really worth it, but it was probably worth it to prepare for a real backend later. 20051219 More instr call statistics gathering and analysis stuff. 20051220 Another fix for MIPS 'mul'. Also converting mul and {d,}cl{o,z} to dyntrans. memory_ppc.c syntax error fix (noticed by Peter Valchev). Beginning to move out machines from src/machine.c into individual files in src/machines (in a way similar to the autodev system for devices). 20051222 Updating the documentation regarding NetBSD/pmax 3.0. 20051223 - " - NetBSD/cats 3.0. 20051225 - " - NetBSD/hpcmips 3.0. 20051226 Continuing on the machine registry redesign. Adding support for ARM rrx (33-bit rotate). Fixing some signed/unsigned issues (exposed by gcc -W). 20051227 Fixing the bug which prevented a NetBSD/prep 3.0 install kernel from starting (triggered when an mtmsr was the last instruction on a page). Unfortunately not enough to get the kernel to run as well as the 2.1 kernels did. 20051230 Some dyntrans refactoring. 20051231 Continuing on the machine registry redesign. 20060101-10 Continuing... moving more machines. Moving MD interrupt stuff from machine.c into a new src/machines/interrupts.c. 20060114 Adding various mvmeppc machine skeletons. 20060115 Continuing on mvme* stuff. NetBSD/mvmeppc prints boot messages (for MVME1600) and reaches the root device prompt, but no specific hardware devices are emulated yet. 20060116 Minor updates to the mvme1600 emulation mode; the Eagle PCI bus seems to work without much modification, and a 21143 can be detected, interrupts might work (but untested so far). Adding a fake MK48Txx (mkclock) device, for NetBSD/mvmeppc. 20060121 Adding an aux control register for ARM. (A BIG thank you to Olivier Houchard for tracking down this bug.) 20060122 Adding more ARM instructions (smulXY), and dev_iq80321_7seg. 20060124 Adding disassembly of more ARM instructions (mia*, mra/mar), and some semi-bogus XScale and i80321 registers. 20060201-02 Various minor updates. Moving the last machines out of machine.c. 20060204 Adding a -c command line option, for running debugger commands before the simulation starts, but after all files have been loaded. Minor iq80321-related updates. 20060209 Minor hacks (DEVINIT macro, etc). Preparing for the generalization of the 64-bit dyntrans address translation subsystem. 20060216 Adding ARM ldrd (double-register load). 20060217 Continuing on various ARM-related stuff. 20060218 More progress on the ATA/wdc emulation for NetBSD/iq80321. NetBSD/evbarm can now be installed :-) Updating the docs, etc. Continuing on Algor emulation. ============== RELEASE 0.3.8 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.982 2005/10/07 22:45:32 debug Exp $ 20050816 Some success in decoding the way the SGI O2 PROM draws graphics during bootup; lines/rectangles and bitmaps work, enough to show the bootlogo etc. :-) Adding more PPC instructions, and (dummy) BAT registers. 20050817 Updating the pckbc to support scancode type 3 keyboards (required in order to interact with the SGI O2 PROM). Adding more PPC instructions. 20050818 Adding more ARM instructions; general register forms. Importing armreg.h from NetBSD (ARM cpu ids). Adding a (dummy) CATS machine mode (using SA110 as the default CPU). Continuing on general dyntrans related stuff. 20050819 Register forms for ARM load/stores. Gaah! The Compaq C Compiler bug is triggered for ARM loads as well, not just PPC :-( Adding full support for ARM PC-relative load/stores, and load/ stores where the PC register is the destination register. Adding support for ARM a.out binaries. 20050820 Continuing to add more ARM instructions, and correcting some bugs. Continuing on CATS emulation. More work on the PPC stuff. 20050821 Minor PPC and ARM updates. Adding more machine types. 20050822 All ARM "data processing instructions" are now generated automatically. 20050824 Beginning the work on the ARM system control coprocessor. Adding support for ARM halfword load/stores, and signed loads. 20050825 Fixing an important bug related to the ARM condition codes. OpenBSD/zaurus and NetBSD/netwinder now print some boot messages. :) Adding a dummy SH (Hitachi SuperH) cpu family. Beginning to add some ARM virtual address translation. MIPS bugfixes: unaligned PC now cause an ADEL exception (at least for non-bintrans execution), and ADEL/ADES (not TLBL/TLBS) are used if userland tries to access kernel space. (Thanks to Joshua Wise for making me aware of these bugs.) 20050827 More work on the ARM emulation, and various other updates. 20050828 More ARM updates. Finally taking the time to work on translation invalidation (i.e. invalidating translated code mappings when memory is written to). Hopefully this doesn't break anything. 20050829 Moving CPU related files from src/ to a new subdir, src/cpus/. Moving PROM emulation stuff from src/ to src/promemul/. Better debug instruction trace for ARM loads and stores. 20050830 Various ARM updates (correcting CMP flag calculation, etc). 20050831 PPC instruction updates. (Flag fixes, etc.) 20050901 Various minor PPC and ARM instruction emulation updates. Minor OpenFirmware emulation updates. 20050903 Adding support for adding arbitrary ARM coprocessors (with the i80321 I/O coprocessor as a first test). Various other ARM and PPC updates. 20050904 Adding some SHcompact disassembly routines. 20050907 (Re)adding a dummy HPPA CPU module, and a dummy i960 module. 20050908 Began hacking on some Apple Partition Table support. 20050909 Adding support for loading Mach-O (Darwin PPC) binaries. 20050910 Fixing an ARM bug (Carry flag was incorrectly updated for some data processing instructions); OpenBSD/cats and NetBSD/ netwinder get quite a bit further now. Applying a patch to dev_wdc, and a one-liner to dev_pcic, to make them work better when emulating new versions of OpenBSD. (Thanks to Alexander Yurchenko for the patches.) Also doing some other minor updates to dev_wdc. (Some cleanup, and finally converting to devinit, etc.) 20050912 IRIX doesn't have u_int64_t by default (noticed by Andreas <avr@gnulinux.nl>); configure updated to reflect this. Working on ARM register bank switching, CPSR vs SPSR issues, and beginning the work on interrupt/exception support. 20050913 Various minor ARM updates (speeding up load/store multiple, and fixing a ROR bug in R(); NetBSD/cats now boots as far as OpenBSD/cats). 20050917 Adding a dummy Atmel AVR (8-bit) cpu family skeleton. 20050918 Various minor updates. 20050919 Symbols are now loaded from Mach-O executables. Continuing the work on adding ARM exception support. 20050920 More work on ARM stuff: OpenBSD/cats and NetBSD/cats reach userland! :-) 20050921 Some more progress on ARM interrupt specifics. 20050923 Fixing linesize for VR4121 (patch by Yurchenko). Also fixing linesizes/cachesizes for some other VR4xxx. Adding a dummy Acer Labs M1543 PCI-ISA bridge (for CATS) and a dummy Symphony Labs 83C553 bridge (for Netwinder), usable by dev_footbridge. 20050924 Some PPC progress. 20050925 More PPC progress. 20050926 PPC progress (fixing some bugs etc); Darwin's kernel gets slightly further than before. 20050928 Various updates: footbridge/ISA/pciide stuff, and finally fixing the VGA text scroll-by-changing-the-base-offset bug. 20050930 Adding a dummy S3 ViRGE pci card for CATS emulation, which both NetBSD and OpenBSD detects as VGA. Continuing on Footbridge (timers, ISA interrupt stuff). 20051001 Continuing... there are still bugs, probably interrupt- related. 20051002 More work on the Footbridge (interrupt stuff). 20051003 Various minor updates. (Trying to find the bug(s).) 20051004 Continuing on the ARM stuff. 20051005 More ARM-related fixes. 20051007 FINALLY! Found and fixed 2 ARM bugs: 1 memory related, and the other was because of an error in the ARM manual (load multiple with the S-bit set should _NOT_ load usermode registers, as the manual says, but it should load saved registers, which may or may not happen to be usermode registers). NetBSD/cats and OpenBSD/cats seem to install fine now :-) except for a minor bug at the end of the OpenBSD/cats install. Updating the documentation, preparing for the next release. 20051008 Continuing with release testing and cleanup.
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.26 |