1 |
/* |
2 |
* Copyright (C) 2003-2006 Anders Gavare. All rights reserved. |
3 |
* |
4 |
* Redistribution and use in source and binary forms, with or without |
5 |
* modification, are permitted provided that the following conditions are met: |
6 |
* |
7 |
* 1. Redistributions of source code must retain the above copyright |
8 |
* notice, this list of conditions and the following disclaimer. |
9 |
* 2. Redistributions in binary form must reproduce the above copyright |
10 |
* notice, this list of conditions and the following disclaimer in the |
11 |
* documentation and/or other materials provided with the distribution. |
12 |
* 3. The name of the author may not be used to endorse or promote products |
13 |
* derived from this software without specific prior written permission. |
14 |
* |
15 |
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
16 |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
17 |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
18 |
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
19 |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
20 |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
21 |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
22 |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
23 |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
24 |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
25 |
* SUCH DAMAGE. |
26 |
* |
27 |
* |
28 |
* $Id: machine_sgi.c,v 1.2 2006/02/03 17:25:14 debug Exp $ |
29 |
* |
30 |
* http://obsolete.majix.org/computers/sgi/iptable.shtml contains a |
31 |
* pretty detailed list of IP ("Inhouse Processor") model numbers. |
32 |
* |
33 |
* See also: http://hardware.majix.org/computers/sgi/iptable.shtml |
34 |
*/ |
35 |
|
36 |
#include <stdio.h> |
37 |
#include <stdlib.h> |
38 |
#include <string.h> |
39 |
|
40 |
#include "arcbios.h" |
41 |
#include "bus_pci.h" |
42 |
#include "cpu.h" |
43 |
#include "device.h" |
44 |
#include "devices.h" |
45 |
#include "diskimage.h" |
46 |
#include "machine.h" |
47 |
#include "machine_interrupts.h" |
48 |
#include "memory.h" |
49 |
#include "misc.h" |
50 |
#include "net.h" |
51 |
|
52 |
#include "sgi_arcbios.h" |
53 |
#include "crimereg.h" |
54 |
|
55 |
|
56 |
#define ETHERNET_STRING_MAXLEN 40 |
57 |
|
58 |
|
59 |
MACHINE_SETUP(sgi) |
60 |
{ |
61 |
uint64_t sgi_ram_offset = 0; |
62 |
int arc_wordlen = sizeof(uint32_t); |
63 |
struct memory *mem = machine->memory; |
64 |
char tmpstr[1000]; |
65 |
int i, j; |
66 |
char *eaddr_string = "eaddr=10:20:30:40:50:60"; /* bogus */ |
67 |
unsigned char macaddr[6]; |
68 |
|
69 |
struct pci_data *pci_data = NULL; |
70 |
|
71 |
machine->machine_name = malloc(MACHINE_NAME_MAXBUF); |
72 |
if (machine->machine_name == NULL) { |
73 |
fprintf(stderr, "out of memory\n"); |
74 |
exit(1); |
75 |
} |
76 |
|
77 |
cpu->byte_order = EMUL_BIG_ENDIAN; |
78 |
snprintf(machine->machine_name, MACHINE_NAME_MAXBUF, |
79 |
"SGI-IP%i", machine->machine_subtype); |
80 |
|
81 |
sgi_ram_offset = 1048576 * machine->memory_offset_in_mb; |
82 |
|
83 |
/* Special cases for IP20,22,24,26 memory offset: */ |
84 |
if (machine->machine_subtype == 20 || machine->machine_subtype == 22 || |
85 |
machine->machine_subtype == 24 || machine->machine_subtype == 26) { |
86 |
dev_ram_init(machine, 0x00000000, 0x10000, DEV_RAM_MIRROR |
87 |
| DEV_RAM_MIGHT_POINT_TO_DEVICES, sgi_ram_offset); |
88 |
dev_ram_init(machine, 0x00050000, sgi_ram_offset-0x50000, |
89 |
DEV_RAM_MIRROR | DEV_RAM_MIGHT_POINT_TO_DEVICES, |
90 |
sgi_ram_offset + 0x50000); |
91 |
} |
92 |
|
93 |
/* Special cases for IP28,30 memory offset: */ |
94 |
if (machine->machine_subtype == 28 || machine->machine_subtype == 30) { |
95 |
/* TODO: length below should maybe not be 128MB? */ |
96 |
dev_ram_init(machine, 0x00000000, 128*1048576, DEV_RAM_MIRROR |
97 |
| DEV_RAM_MIGHT_POINT_TO_DEVICES, sgi_ram_offset); |
98 |
} |
99 |
|
100 |
net_generate_unique_mac(machine, macaddr); |
101 |
eaddr_string = malloc(ETHERNET_STRING_MAXLEN); |
102 |
|
103 |
switch (machine->machine_subtype) { |
104 |
|
105 |
case 10: |
106 |
strlcat(machine->machine_name, " (4D/25)", MACHINE_NAME_MAXBUF); |
107 |
/* TODO */ |
108 |
break; |
109 |
|
110 |
case 12: |
111 |
strlcat(machine->machine_name, |
112 |
" (Iris Indigo IP12)", MACHINE_NAME_MAXBUF); |
113 |
|
114 |
/* TODO */ |
115 |
/* 33 MHz R3000, according to http://www.irisindigo.com/ */ |
116 |
/* "capable of addressing up to 96MB of memory." */ |
117 |
|
118 |
break; |
119 |
|
120 |
case 19: |
121 |
strlcat(machine->machine_name, |
122 |
" (Everest IP19)", MACHINE_NAME_MAXBUF); |
123 |
machine->main_console_handle = (size_t)device_add(machine, |
124 |
"z8530 addr=0x1fbd9830 irq=0 addr_mult=4"); |
125 |
dev_scc_init(machine, mem, 0x10086000, 0, machine->use_x11, |
126 |
0, 8); /* serial? irix? */ |
127 |
|
128 |
device_add(machine, "sgi_ip19 addr=0x18000000"); |
129 |
|
130 |
/* Irix' <everest_du_init+0x130> reads this device: */ |
131 |
device_add(machine, "random addr=0x10006000 len=16"); |
132 |
|
133 |
/* Irix' get_mpconf() looks for this: (TODO) */ |
134 |
store_32bit_word(cpu, 0xa0000000 + 0x3000, |
135 |
0xbaddeed2); |
136 |
|
137 |
/* Memory size, not 4096 byte pages, but 256 bytes? |
138 |
(16 is size of kernel... approx) */ |
139 |
store_32bit_word(cpu, 0xa0000000 + 0x26d0, 30000); |
140 |
/* (machine->physical_ram_in_mb - 16) * (1048576 / 256)); */ |
141 |
|
142 |
break; |
143 |
|
144 |
case 20: |
145 |
strlcat(machine->machine_name, |
146 |
" (Indigo)", MACHINE_NAME_MAXBUF); |
147 |
|
148 |
/* |
149 |
* Guesses based on NetBSD 2.0 beta, 20040606. |
150 |
* |
151 |
* int0 at mainbus0 addr 0x1fb801c0: bus 1MHz, CPU 2MHz |
152 |
* imc0 at mainbus0 addr 0x1fa00000: revision 0 |
153 |
* gio0 at imc0 |
154 |
* unknown GIO card (product 0x00 revision 0x00) at gio0 slot 0 addr 0x1f400000 not configured |
155 |
* unknown GIO card (product 0x00 revision 0x00) at gio0 slot 1 addr 0x1f600000 not configured |
156 |
* unknown GIO card (product 0x00 revision 0x00) at gio0 slot 2 addr 0x1f000000 not configured |
157 |
* hpc0 at gio0 addr 0x1fb80000: SGI HPC1 |
158 |
* zsc0 at hpc0 offset 0xd10 (channels 0 and 1, channel 1 for console) |
159 |
* zsc1 at hpc0 offset 0xd00 (2 channels) |
160 |
* sq0 at hpc0 offset 0x100: SGI Seeq 80c03 |
161 |
* wdsc0 at hpc0 offset 0x11f |
162 |
* dpclock0 at hpc0 offset 0xe00 |
163 |
*/ |
164 |
|
165 |
/* int0 at mainbus0 addr 0x1fb801c0 */ |
166 |
machine->md_int.sgi_ip20_data = dev_sgi_ip20_init(cpu, mem, DEV_SGI_IP20_BASE); |
167 |
|
168 |
/* imc0 at mainbus0 addr 0x1fa00000: revision 0: TODO (or in dev_sgi_ip20?) */ |
169 |
|
170 |
machine->main_console_handle = (size_t)device_add(machine, |
171 |
"z8530 addr=0x1fbd9830 irq=0 addr_mult=4"); |
172 |
|
173 |
/* This is the zsc0 reported by NetBSD: TODO: irqs */ |
174 |
machine->main_console_handle = (size_t)device_add(machine, |
175 |
"z8530 addr=0x1fb80d10 irq=0 addr_mult=4"); |
176 |
machine->main_console_handle = (size_t)device_add(machine, |
177 |
"z8530 addr=0x1fb80d00 irq=0 addr_mult=4"); |
178 |
|
179 |
/* WDSC SCSI controller: */ |
180 |
dev_wdsc_init(machine, mem, 0x1fb8011f, 0, 0); |
181 |
|
182 |
/* Return memory read errors so that hpc1 |
183 |
and hpc2 are not detected: */ |
184 |
device_add(machine, "unreadable addr=0x1fb00000 len=0x10000"); |
185 |
device_add(machine, "unreadable addr=0x1f980000 len=0x10000"); |
186 |
|
187 |
/* Return nothing for gio slots 0, 1, and 2: */ |
188 |
device_add(machine, "unreadable addr=0x1f400000 len=0x1000"); /* gio0 slot 0 */ |
189 |
device_add(machine, "unreadable addr=0x1f600000 len=0x1000"); /* gio0 slot 1 */ |
190 |
device_add(machine, "unreadable addr=0x1f000000 len=0x1000"); /* gio0 slot 2 */ |
191 |
|
192 |
break; |
193 |
|
194 |
case 21: |
195 |
strlcat(machine->machine_name, /* TODO */ |
196 |
" (uknown SGI-IP21 ?)", MACHINE_NAME_MAXBUF); |
197 |
/* NOTE: Special case for arc_wordlen: */ |
198 |
arc_wordlen = sizeof(uint64_t); |
199 |
|
200 |
device_add(machine, "random addr=0x418000200, len=0x20000"); |
201 |
|
202 |
break; |
203 |
|
204 |
case 22: |
205 |
case 24: |
206 |
if (machine->machine_subtype == 22) { |
207 |
strlcat(machine->machine_name, |
208 |
" (Indy, Indigo2, Challenge S; Full-house)", |
209 |
MACHINE_NAME_MAXBUF); |
210 |
machine->md_int.sgi_ip22_data = dev_sgi_ip22_init(machine, mem, 0x1fbd9000, 0); |
211 |
} else { |
212 |
strlcat(machine->machine_name, |
213 |
" (Indy, Indigo2, Challenge S; Guiness)", |
214 |
MACHINE_NAME_MAXBUF); |
215 |
machine->md_int.sgi_ip22_data = dev_sgi_ip22_init(machine, mem, 0x1fbd9880, 1); |
216 |
} |
217 |
|
218 |
/* |
219 |
Why is this here? TODO |
220 |
dev_ram_init(machine, 0x88000000ULL, |
221 |
128 * 1048576, DEV_RAM_MIRROR, 0x08000000); |
222 |
*/ |
223 |
machine->md_interrupt = sgi_ip22_interrupt; |
224 |
|
225 |
/* |
226 |
* According to NetBSD 1.6.2: |
227 |
* |
228 |
* imc0 at mainbus0 addr 0x1fa00000, Revision 0 |
229 |
* gio0 at imc0 |
230 |
* hpc0 at gio0 addr 0x1fb80000: SGI HPC3 |
231 |
* zsc0 at hpc0 offset 0x59830 |
232 |
* zstty0 at zsc0 channel 1 (console i/o) |
233 |
* zstty1 at zsc0 channel 0 |
234 |
* sq0 at hpc0 offset 0x54000: SGI Seeq 80c03 (Ethernet) |
235 |
* wdsc0 at hpc0 offset 0x44000: WD33C93 SCSI, rev=0, target 7 |
236 |
* scsibus2 at wdsc0: 8 targets, 8 luns per target |
237 |
* dsclock0 at hpc0 offset 0x60000 |
238 |
* |
239 |
* According to Linux/IP22: |
240 |
* tty00 at 0xbfbd9830 (irq = 45) is a Zilog8530 |
241 |
* tty01 at 0xbfbd9838 (irq = 45) is a Zilog8530 |
242 |
* |
243 |
* and according to NetBSD 2.0_BETA (20040606): |
244 |
* |
245 |
* haltwo0 at hpc0 offset 0x58000: HAL2 revision 0.0.0 |
246 |
* audio0 at haltwo0: half duplex |
247 |
* |
248 |
* IRQ numbers are of the form 8 + x, where x = 0..31 for local0 |
249 |
* interrupts, and 32..63 for local1. + y*65 for "mappable". |
250 |
*/ |
251 |
|
252 |
/* zsc0 serial console. 8 + 32 + 3 + 64*5 = 43+64*5 = 363 */ |
253 |
i = (size_t)device_add(machine, |
254 |
"z8530 addr=0x1fbd9830 irq=363 addr_mult=4"); |
255 |
|
256 |
/* Not supported by NetBSD 1.6.2, but by 2.0_BETA: */ |
257 |
j = dev_pckbc_init(machine, mem, 0x1fbd9840, PCKBC_8242, |
258 |
0, 0, machine->use_x11, 0); /* TODO: irq numbers */ |
259 |
|
260 |
if (machine->use_x11) |
261 |
machine->main_console_handle = j; |
262 |
|
263 |
/* sq0: Ethernet. TODO: This should have irq_nr = 8 + 3 */ |
264 |
/* dev_sq_init... */ |
265 |
|
266 |
/* wdsc0: SCSI */ |
267 |
dev_wdsc_init(machine, mem, 0x1fbc4000, 0, 8 + 1); |
268 |
|
269 |
/* wdsc1: SCSI TODO: irq nr */ |
270 |
dev_wdsc_init(machine, mem, 0x1fbcc000, 1, 8 + 1); |
271 |
|
272 |
/* dsclock0: TODO: possibly irq 8 + 33 */ |
273 |
|
274 |
/* Return memory read errors so that hpc1 and hpc2 are not detected: */ |
275 |
device_add(machine, "unreadable addr=0x1fb00000, len=0x10000"); |
276 |
device_add(machine, "unreadable addr=0x1f980000, len=0x10000"); |
277 |
|
278 |
/* Similarly for gio slots 0, 1, and 2: */ |
279 |
device_add(machine, "unreadable addr=0x1f400000, len=0x1000"); /* gio0 slot 0 */ |
280 |
device_add(machine, "unreadable addr=0x1f600000, len=0x1000"); /* gio0 slot 1 */ |
281 |
device_add(machine, "unreadable addr=0x1f000000, len=0x1000"); /* gio0 slot 2 */ |
282 |
|
283 |
break; |
284 |
|
285 |
case 25: |
286 |
/* NOTE: Special case for arc_wordlen: */ |
287 |
arc_wordlen = sizeof(uint64_t); |
288 |
strlcat(machine->machine_name, |
289 |
" (Everest IP25)", MACHINE_NAME_MAXBUF); |
290 |
|
291 |
/* serial? irix? */ |
292 |
dev_scc_init(machine, mem, |
293 |
0x400086000ULL, 0, machine->use_x11, 0, 8); |
294 |
|
295 |
/* NOTE: ip19! (perhaps not really the same */ |
296 |
device_add(machine, "sgi_ip19 addr=0x18000000"); |
297 |
|
298 |
/* |
299 |
* Memory size, not 4096 byte pages, but 256 |
300 |
* bytes? (16 is size of kernel... approx) |
301 |
*/ |
302 |
store_32bit_word(cpu, 0xa0000000ULL + 0x26d0, |
303 |
30000); /* (machine->physical_ram_in_mb - 16) |
304 |
* (1048576 / 256)); */ |
305 |
|
306 |
break; |
307 |
|
308 |
case 26: |
309 |
/* NOTE: Special case for arc_wordlen: */ |
310 |
arc_wordlen = sizeof(uint64_t); |
311 |
strlcat(machine->machine_name, " (uknown SGI-IP26 ?)", |
312 |
MACHINE_NAME_MAXBUF); /* TODO */ |
313 |
machine->main_console_handle = (size_t)device_add(machine, |
314 |
"z8530 addr=0x1fbd9830 irq=0 addr_mult=4"); |
315 |
break; |
316 |
|
317 |
case 27: |
318 |
strlcat(machine->machine_name, " (Origin 200/2000, Onyx2)", |
319 |
MACHINE_NAME_MAXBUF); |
320 |
arc_wordlen = sizeof(uint64_t); |
321 |
/* 2 cpus per node */ |
322 |
|
323 |
machine->main_console_handle = (size_t)device_add(machine, |
324 |
"z8530 addr=0x1fbd9830 irq=0 addr_mult=4"); |
325 |
break; |
326 |
|
327 |
case 28: |
328 |
/* NOTE: Special case for arc_wordlen: */ |
329 |
arc_wordlen = sizeof(uint64_t); |
330 |
strlcat(machine->machine_name, |
331 |
" (Impact Indigo2 ?)", MACHINE_NAME_MAXBUF); |
332 |
|
333 |
device_add(machine, "random addr=0x1fbe0000, len=1"); |
334 |
|
335 |
/* Something at paddr 0x1880fb0000. */ |
336 |
|
337 |
break; |
338 |
|
339 |
case 30: |
340 |
/* NOTE: Special case for arc_wordlen: */ |
341 |
arc_wordlen = sizeof(uint64_t); |
342 |
strlcat(machine->machine_name, " (Octane)", |
343 |
MACHINE_NAME_MAXBUF); |
344 |
|
345 |
machine->md_int.sgi_ip30_data = dev_sgi_ip30_init(machine, mem, 0x0ff00000); |
346 |
machine->md_interrupt = sgi_ip30_interrupt; |
347 |
|
348 |
dev_ram_init(machine, 0xa0000000ULL, 128 * 1048576, |
349 |
DEV_RAM_MIRROR | DEV_RAM_MIGHT_POINT_TO_DEVICES, |
350 |
0x00000000); |
351 |
|
352 |
dev_ram_init(machine, 0x80000000ULL, |
353 |
32 * 1048576, DEV_RAM_RAM, 0x00000000); |
354 |
|
355 |
/* |
356 |
* Something at paddr=1f022004: TODO |
357 |
* Something at paddr=813f0510 - paddr=813f0570 ? |
358 |
* Something at paddr=813f04b8 |
359 |
* Something at paddr=f8000003c used by Linux/Octane |
360 |
* |
361 |
* 16550 serial port at paddr=1f620178, addr mul 1 |
362 |
* (Error messages are printed to this serial port by the PROM.) |
363 |
* |
364 |
* There seems to also be a serial port at 1f620170. The "symmon" |
365 |
* program dumps something there, but it doesn't look like |
366 |
* readable text. (TODO) |
367 |
*/ |
368 |
|
369 |
/* TODO: irq! */ |
370 |
snprintf(tmpstr, sizeof(tmpstr), "ns16550 irq=0 addr=0x1f620170 name2=tty0 in_use=%i", machine->use_x11? 0 : 1); |
371 |
machine->main_console_handle = (size_t)device_add(machine, tmpstr); |
372 |
snprintf(tmpstr, sizeof(tmpstr), "ns16550 irq=0 addr=0x1f620178 name2=tty1 in_use=0"); |
373 |
device_add(machine, tmpstr); |
374 |
|
375 |
/* MardiGras graphics: */ |
376 |
device_add(machine, "sgi_mardigras addr=0x1c000000"); |
377 |
|
378 |
break; |
379 |
|
380 |
case 32: |
381 |
strlcat(machine->machine_name, " (O2)", MACHINE_NAME_MAXBUF); |
382 |
machine->stable = 1; |
383 |
|
384 |
/* TODO: Find out where the physical ram is actually located. */ |
385 |
dev_ram_init(machine, 0x07ffff00ULL, 256, DEV_RAM_MIRROR, 0x03ffff00); |
386 |
dev_ram_init(machine, 0x10000000ULL, 256, DEV_RAM_MIRROR, 0x00000000); |
387 |
dev_ram_init(machine, 0x11ffff00ULL, 256, DEV_RAM_MIRROR, 0x01ffff00); |
388 |
dev_ram_init(machine, 0x12000000ULL, 256, DEV_RAM_MIRROR, 0x02000000); |
389 |
dev_ram_init(machine, 0x17ffff00ULL, 256, DEV_RAM_MIRROR, 0x03ffff00); |
390 |
dev_ram_init(machine, 0x20000000ULL, 128 * 1048576, DEV_RAM_MIRROR, 0x00000000); |
391 |
dev_ram_init(machine, 0x40000000ULL, 128 * 1048576, DEV_RAM_MIRROR, 0x10000000); |
392 |
|
393 |
machine->md_int.ip32.crime_data = dev_crime_init(machine, mem, 0x14000000, 2, machine->use_x11); /* crime0 */ |
394 |
dev_sgi_mte_init(mem, 0x15000000); /* mte ??? memory thing */ |
395 |
dev_sgi_gbe_init(machine, mem, 0x16000000); /* gbe? framebuffer? */ |
396 |
|
397 |
/* |
398 |
* A combination of NetBSD and Linux info: |
399 |
* |
400 |
* 17000000 vice (Video Image Compression Engine) |
401 |
* 1f000000 mace |
402 |
* 1f080000 macepci |
403 |
* 1f100000 vin1 |
404 |
* 1f180000 vin2 |
405 |
* 1f200000 vout |
406 |
* 1f280000 enet (mec0, MAC-110 Ethernet) |
407 |
* 1f300000 perif: |
408 |
* 1f300000 audio |
409 |
* 1f310000 isa |
410 |
* 1f318000 (accessed by Irix' pciio_pio_write64) |
411 |
* 1f320000 kbdms |
412 |
* 1f330000 i2c |
413 |
* 1f340000 ust |
414 |
* 1f380000 isa ext |
415 |
* 1f390000 com0 (serial) |
416 |
* 1f398000 com1 (serial) |
417 |
* 1f3a0000 mcclock0 |
418 |
*/ |
419 |
|
420 |
machine->md_int.ip32.mace_data = dev_mace_init(mem, 0x1f310000, 2); |
421 |
machine->md_interrupt = sgi_ip32_interrupt; |
422 |
|
423 |
/* |
424 |
* IRQ mapping is really ugly. TODO: fix |
425 |
* |
426 |
* com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo |
427 |
* com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo |
428 |
* pckbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0 |
429 |
* mcclock0 at mace0 offset 0x3a0000 intrmask 0x0 |
430 |
* macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1 |
431 |
* |
432 |
* intr 4 = MACE_PERIPH_SERIAL |
433 |
* intr 5 = MACE_PERIPH_MISC |
434 |
* intr 7 = MACE_PCI_BRIDGE |
435 |
*/ |
436 |
|
437 |
if (eaddr_string == NULL) { |
438 |
fprintf(stderr, "out of memory\n"); |
439 |
exit(1); |
440 |
} |
441 |
snprintf(eaddr_string, ETHERNET_STRING_MAXLEN, |
442 |
"eaddr=%02x:%02x:%02x:%02x:%02x:%02x", |
443 |
macaddr[0], macaddr[1], macaddr[2], |
444 |
macaddr[3], macaddr[4], macaddr[5]); |
445 |
dev_sgi_mec_init(machine, mem, 0x1f280000, |
446 |
MACE_ETHERNET, macaddr); |
447 |
|
448 |
dev_sgi_ust_init(mem, 0x1f340000); /* ust? */ |
449 |
|
450 |
snprintf(tmpstr, sizeof(tmpstr), "ns16550 irq=%i addr=0x1f390000 addr_mult=0x100 in_use=%i name2=tty0", |
451 |
(1<<20) + MACE_PERIPH_SERIAL, machine->use_x11? 0 : 1); |
452 |
j = (size_t)device_add(machine, tmpstr); |
453 |
snprintf(tmpstr, sizeof(tmpstr), "ns16550 irq=%i addr=0x1f398000 addr_mult=0x100 in_use=%i name2=tty1", |
454 |
(1<<26) + MACE_PERIPH_SERIAL, 0); |
455 |
device_add(machine, tmpstr); |
456 |
|
457 |
machine->main_console_handle = j; |
458 |
|
459 |
/* TODO: Once this works, it should be enabled |
460 |
always, not just when using X! */ |
461 |
if (machine->use_x11) { |
462 |
i = dev_pckbc_init(machine, mem, 0x1f320000, |
463 |
PCKBC_8242, 0x200 + MACE_PERIPH_MISC, |
464 |
0x800 + MACE_PERIPH_MISC, machine->use_x11, 0); |
465 |
/* keyb+mouse (mace irq numbers) */ |
466 |
machine->main_console_handle = i; |
467 |
} |
468 |
|
469 |
dev_mc146818_init(machine, mem, 0x1f3a0000, (1<<8) + MACE_PERIPH_MISC, MC146818_SGI, 0x40); /* mcclock0 */ |
470 |
machine->main_console_handle = (size_t)device_add(machine, |
471 |
"z8530 addr=0x1fbd9830 irq=0 addr_mult=4"); |
472 |
|
473 |
/* |
474 |
* PCI devices: (according to NetBSD's GENERIC config file for sgimips) |
475 |
* |
476 |
* ne* at pci? dev ? function ? |
477 |
* ahc0 at pci0 dev 1 function ? |
478 |
* ahc1 at pci0 dev 2 function ? |
479 |
*/ |
480 |
|
481 |
pci_data = dev_macepci_init(machine, mem, 0x1f080000, MACE_PCI_BRIDGE); /* macepci0 */ |
482 |
/* bus_pci_add(machine, pci_data, mem, 0, 0, 0, "ne2000"); TODO */ |
483 |
|
484 |
/* TODO: make this nicer */ |
485 |
if (diskimage_exist(machine, 0, DISKIMAGE_SCSI) || |
486 |
diskimage_exist(machine, 1, DISKIMAGE_SCSI) || |
487 |
diskimage_exist(machine, 2, DISKIMAGE_SCSI) || |
488 |
diskimage_exist(machine, 3, DISKIMAGE_SCSI) || |
489 |
diskimage_exist(machine, 4, DISKIMAGE_SCSI) || |
490 |
diskimage_exist(machine, 5, DISKIMAGE_SCSI) || |
491 |
diskimage_exist(machine, 6, DISKIMAGE_SCSI) || |
492 |
diskimage_exist(machine, 7, DISKIMAGE_SCSI)) |
493 |
bus_pci_add(machine, pci_data, mem, 0, 1, 0, "ahc"); |
494 |
|
495 |
/* TODO: second ahc */ |
496 |
/* bus_pci_add(machine, pci_data, mem, 0, 2, 0, "ahc"); */ |
497 |
|
498 |
break; |
499 |
|
500 |
case 35: |
501 |
strlcat(machine->machine_name, |
502 |
" (Origin 3000)", MACHINE_NAME_MAXBUF); |
503 |
/* 4 cpus per node */ |
504 |
|
505 |
machine->main_console_handle = (size_t)device_add(machine, |
506 |
"z8530 addr=0x1fbd9830 irq=0 addr_mult=4"); |
507 |
break; |
508 |
|
509 |
case 53: |
510 |
strlcat(machine->machine_name, " (Origin 350)", |
511 |
MACHINE_NAME_MAXBUF); |
512 |
|
513 |
/* |
514 |
* According to http://kumba.drachentekh.net/xml/myguide.html |
515 |
* Origin 350, Tezro IP53 R16000 |
516 |
*/ |
517 |
break; |
518 |
|
519 |
default: |
520 |
fatal("unimplemented SGI machine type IP%i\n", |
521 |
machine->machine_subtype); |
522 |
exit(1); |
523 |
} |
524 |
|
525 |
if (!machine->prom_emulation) |
526 |
return; |
527 |
|
528 |
arcbios_init(machine, arc_wordlen == sizeof(uint64_t), sgi_ram_offset, |
529 |
eaddr_string, macaddr); |
530 |
} |
531 |
|
532 |
|
533 |
MACHINE_DEFAULT_CPU(sgi) |
534 |
{ |
535 |
if (machine->machine_subtype <= 12) |
536 |
machine->cpu_name = strdup("R3000"); |
537 |
if (machine->cpu_name == NULL && machine->machine_subtype == 35) |
538 |
machine->cpu_name = strdup("R12000"); |
539 |
if (machine->cpu_name == NULL && (machine->machine_subtype == 25 || |
540 |
machine->machine_subtype == 27 || machine->machine_subtype == 28 || |
541 |
machine->machine_subtype == 30 || machine->machine_subtype == 32)) |
542 |
machine->cpu_name = strdup("R10000"); |
543 |
if (machine->cpu_name == NULL && (machine->machine_subtype == 21 || |
544 |
machine->machine_subtype == 26)) |
545 |
machine->cpu_name = strdup("R8000"); |
546 |
if (machine->cpu_name == NULL && machine->machine_subtype == 24) |
547 |
machine->cpu_name = strdup("R5000"); |
548 |
|
549 |
/* Other SGIs should probably work with |
550 |
R4000, R4400 or R5000 or similar: */ |
551 |
if (machine->cpu_name == NULL) |
552 |
machine->cpu_name = strdup("R4400"); |
553 |
} |
554 |
|
555 |
|
556 |
MACHINE_DEFAULT_RAM(sgi) |
557 |
{ |
558 |
machine->physical_ram_in_mb = 64; |
559 |
} |
560 |
|
561 |
|
562 |
MACHINE_REGISTER(sgi) |
563 |
{ |
564 |
MR_DEFAULT(sgi, "SGI", ARCH_MIPS, MACHINE_SGI, 1, 10); |
565 |
me->set_default_ram = machine_default_ram_sgi; |
566 |
me->aliases[0] = "silicon graphics"; |
567 |
me->aliases[1] = "sgi"; |
568 |
|
569 |
me->subtype[0] = machine_entry_subtype_new("IP12", 12, 1); |
570 |
me->subtype[0]->aliases[0] = "ip12"; |
571 |
|
572 |
me->subtype[1] = machine_entry_subtype_new("IP19", 19, 1); |
573 |
me->subtype[1]->aliases[0] = "ip19"; |
574 |
|
575 |
me->subtype[2] = machine_entry_subtype_new("IP20", 20, 1); |
576 |
me->subtype[2]->aliases[0] = "ip20"; |
577 |
|
578 |
me->subtype[3] = machine_entry_subtype_new("IP22", 22, 2); |
579 |
me->subtype[3]->aliases[0] = "ip22"; |
580 |
me->subtype[3]->aliases[1] = "indy"; |
581 |
|
582 |
me->subtype[4] = machine_entry_subtype_new("IP24", 24, 1); |
583 |
me->subtype[4]->aliases[0] = "ip24"; |
584 |
|
585 |
me->subtype[5] = machine_entry_subtype_new("IP27", 27, 3); |
586 |
me->subtype[5]->aliases[0] = "ip27"; |
587 |
me->subtype[5]->aliases[1] = "origin 200"; |
588 |
me->subtype[5]->aliases[2] = "origin 2000"; |
589 |
|
590 |
me->subtype[6] = machine_entry_subtype_new("IP28", 28, 1); |
591 |
me->subtype[6]->aliases[0] = "ip28"; |
592 |
|
593 |
me->subtype[7] = machine_entry_subtype_new("IP30", 30, 2); |
594 |
me->subtype[7]->aliases[0] = "ip30"; |
595 |
me->subtype[7]->aliases[1] = "octane"; |
596 |
|
597 |
me->subtype[8] = machine_entry_subtype_new("IP32", 32, 2); |
598 |
me->subtype[8]->aliases[0] = "ip32"; |
599 |
me->subtype[8]->aliases[1] = "o2"; |
600 |
|
601 |
me->subtype[9] = machine_entry_subtype_new("IP35", 35, 1); |
602 |
me->subtype[9]->aliases[0] = "ip35"; |
603 |
|
604 |
machine_entry_add(me, ARCH_MIPS); |
605 |
} |
606 |
|