src/machines/machine_sandpoint.c

/*
 *  Copyright (C) 2005-2007  Anders Gavare.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright  
 *     notice, this list of conditions and the following disclaimer in the 
 *     documentation and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE   
 *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 *  SUCH DAMAGE.
 *   
 *
 *  $Id: machine_sandpoint.c,v 1.12 2007/06/15 18:08:10 debug Exp $
 *
 *  COMMENT: Sandpoint PPC board implemented as D-Link DSM-G600
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "bus_pci.h"
#include "cpu.h"
#include "device.h"
#include "devices.h"
#include "machine.h"
#include "memory.h"
#include "misc.h"


MACHINE_SETUP(sandpoint)
{
        struct pci_data *pci_data;
//      char tmpstr[300];

        /*
         *  NetBSD/sandpoint (http://www.netbsd.org/ports/sandpoint/)
         */
        machine->machine_name = "Sandpoint D-Link DSM-G600 PPC board";

        /*  Bogus default speed = 133 MHz  */
        if (machine->emulated_hz == 0)
                machine->emulated_hz = 133000000;

        /*  Sandpoint PPC specific motherboard registers:  */
        device_add(machine, "sandpoint");

        /*  PCI and Interrupt controller:  */
        pci_data = device_add(machine, "mpc10x");

#if 0
        /*  RTC at "ext int 5" = "int 25" in IBM jargon, int
            31-25 = 6 for the rest of us.  */
        snprintf(tmpstr, sizeof(tmpstr), "%s.cpu[%i].mpc10x.%i",
            machine->path, machine->bootstrap_cpu, 31-25);
        dev_mc146818_init(machine, machine->memory, 0x7ff00000, tmpstr,
            MC146818_SANDPOINT, 1);

        bus_pci_add(machine, pci_data, machine->memory, 0, 8, 0, "dec21143");
#endif
}


MACHINE_DEFAULT_CPU(sandpoint)
{
        machine->cpu_name = strdup("PPC603e");
}


MACHINE_REGISTER(sandpoint)
{
        MR_DEFAULT(sandpoint, "Sandpoint D-Link DSM-G600 PPC board", ARCH_PPC, MACHINE_SANDPOINT);

        machine_entry_add_alias(me, "sandpoint");
}

1	dpavlin	22	/*
2	dpavlin	34	* Copyright (C) 2005-2007 Anders Gavare. All rights reserved.
3	dpavlin	22	*
4			* Redistribution and use in source and binary forms, with or without
5			* modification, are permitted provided that the following conditions are met:
6			*
7			* 1. Redistributions of source code must retain the above copyright
8			* notice, this list of conditions and the following disclaimer.
9			* 2. Redistributions in binary form must reproduce the above copyright
10			* notice, this list of conditions and the following disclaimer in the
11			* documentation and/or other materials provided with the distribution.
12			* 3. The name of the author may not be used to endorse or promote products
13			* derived from this software without specific prior written permission.
14			*
15			* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16			* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17			* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18			* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19			* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20			* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21			* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22			* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23			* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24			* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25			* SUCH DAMAGE.
26			*
27			*
28	dpavlin	49	* $Id: machine_sandpoint.c,v 1.12 2007/06/15 18:08:10 debug Exp $
29	dpavlin	42	*
30	dpavlin	49	* COMMENT: Sandpoint PPC board implemented as D-Link DSM-G600
31	dpavlin	22	*/
32
33			#include <stdio.h>
34	dpavlin	34	#include <stdlib.h>
35	dpavlin	22	#include <string.h>
36
37			#include "bus_pci.h"
38			#include "cpu.h"
39			#include "device.h"
40			#include "devices.h"
41			#include "machine.h"
42			#include "memory.h"
43			#include "misc.h"
44
45
46
47	dpavlin	49	MACHINE_SETUP(sandpoint)
48	dpavlin	22	{
49	dpavlin	34	struct pci_data *pci_data;
50	dpavlin	49	// char tmpstr[300];
51	dpavlin	34
52	dpavlin	22	/*
53	dpavlin	49	* NetBSD/sandpoint (http://www.netbsd.org/ports/sandpoint/)
54	dpavlin	22	*/
55	dpavlin	49	machine->machine_name = "Sandpoint D-Link DSM-G600 PPC board";
56	dpavlin	34
57	dpavlin	46	/* Bogus default speed = 133 MHz */
58	dpavlin	22	if (machine->emulated_hz == 0)
59	dpavlin	46	machine->emulated_hz = 133000000;
60	dpavlin	22
61	dpavlin	49	/* Sandpoint PPC specific motherboard registers: */
62			device_add(machine, "sandpoint");
63	dpavlin	22
64	dpavlin	34	/* PCI and Interrupt controller: */
65	dpavlin	53	pci_data = device_add(machine, "mpc10x");
66	dpavlin	22
67	dpavlin	49	#if 0
68	dpavlin	22	/* RTC at "ext int 5" = "int 25" in IBM jargon, int
69			31-25 = 6 for the rest of us. */
70	dpavlin	53	snprintf(tmpstr, sizeof(tmpstr), "%s.cpu[%i].mpc10x.%i",
71	dpavlin	34	machine->path, machine->bootstrap_cpu, 31-25);
72			dev_mc146818_init(machine, machine->memory, 0x7ff00000, tmpstr,
73	dpavlin	49	MC146818_SANDPOINT, 1);
74	dpavlin	22
75	dpavlin	34	bus_pci_add(machine, pci_data, machine->memory, 0, 8, 0, "dec21143");
76	dpavlin	49	#endif
77	dpavlin	22	}
78
79
80	dpavlin	49	MACHINE_DEFAULT_CPU(sandpoint)
81	dpavlin	22	{
82	dpavlin	54	machine->cpu_name = strdup("PPC603e");
83	dpavlin	22	}
84
85
86	dpavlin	49	MACHINE_REGISTER(sandpoint)
87	dpavlin	22	{
88	dpavlin	49	MR_DEFAULT(sandpoint, "Sandpoint D-Link DSM-G600 PPC board", ARCH_PPC, MACHINE_SANDPOINT);
89	dpavlin	26
90	dpavlin	49	machine_entry_add_alias(me, "sandpoint");
91	dpavlin	22	}
92