1 |
dpavlin |
4 |
/* |
2 |
dpavlin |
34 |
* Copyright (C) 2004-2007 Anders Gavare. All rights reserved. |
3 |
dpavlin |
4 |
* |
4 |
|
|
* Redistribution and use in source and binary forms, with or without |
5 |
|
|
* modification, are permitted provided that the following conditions are met: |
6 |
|
|
* |
7 |
|
|
* 1. Redistributions of source code must retain the above copyright |
8 |
|
|
* notice, this list of conditions and the following disclaimer. |
9 |
|
|
* 2. Redistributions in binary form must reproduce the above copyright |
10 |
|
|
* notice, this list of conditions and the following disclaimer in the |
11 |
|
|
* documentation and/or other materials provided with the distribution. |
12 |
|
|
* 3. The name of the author may not be used to endorse or promote products |
13 |
|
|
* derived from this software without specific prior written permission. |
14 |
|
|
* |
15 |
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
16 |
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
17 |
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
18 |
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
19 |
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
20 |
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
21 |
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
22 |
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
23 |
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
24 |
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
25 |
|
|
* SUCH DAMAGE. |
26 |
|
|
* |
27 |
|
|
* |
28 |
dpavlin |
44 |
* $Id: bus_pci.c,v 1.85 2007/06/16 14:39:18 debug Exp $ |
29 |
dpavlin |
4 |
* |
30 |
dpavlin |
42 |
* COMMENT: Generic PCI bus framework |
31 |
dpavlin |
4 |
* |
32 |
dpavlin |
42 |
* This is not a normal "device", but is used by individual PCI controllers |
33 |
|
|
* and devices. |
34 |
|
|
* |
35 |
dpavlin |
20 |
* See NetBSD's pcidevs.h for more PCI vendor and device identifiers. |
36 |
|
|
* |
37 |
|
|
* TODO: |
38 |
|
|
* |
39 |
|
|
* x) Allow guest OSes to do runtime address fixups (i.e. actually |
40 |
|
|
* move a device from one address to another). |
41 |
|
|
* |
42 |
|
|
* x) Generalize the PCI and legacy ISA interrupt routing stuff. |
43 |
|
|
* |
44 |
|
|
* x) Make sure that pci_little_endian is used correctly everywhere. |
45 |
dpavlin |
4 |
*/ |
46 |
|
|
|
47 |
|
|
#include <stdio.h> |
48 |
|
|
#include <stdlib.h> |
49 |
|
|
#include <string.h> |
50 |
|
|
|
51 |
dpavlin |
20 |
#define BUS_PCI_C |
52 |
|
|
|
53 |
dpavlin |
34 |
#include "bus_isa.h" |
54 |
dpavlin |
20 |
#include "bus_pci.h" |
55 |
|
|
#include "cpu.h" |
56 |
|
|
#include "device.h" |
57 |
|
|
#include "devices.h" |
58 |
|
|
#include "diskimage.h" |
59 |
|
|
#include "machine.h" |
60 |
dpavlin |
4 |
#include "memory.h" |
61 |
|
|
#include "misc.h" |
62 |
|
|
|
63 |
dpavlin |
42 |
#include "cpc700reg.h" |
64 |
dpavlin |
30 |
#include "wdc.h" |
65 |
|
|
|
66 |
dpavlin |
20 |
extern int verbose; |
67 |
dpavlin |
4 |
|
68 |
dpavlin |
20 |
|
69 |
dpavlin |
24 |
#ifdef UNSTABLE_DEVEL |
70 |
|
|
#define debug fatal |
71 |
|
|
#endif |
72 |
dpavlin |
4 |
|
73 |
dpavlin |
14 |
|
74 |
dpavlin |
22 |
/* |
75 |
|
|
* bus_pci_decompose_1(): |
76 |
|
|
* |
77 |
|
|
* Helper function for decomposing Mechanism 1 tags. |
78 |
|
|
*/ |
79 |
|
|
void bus_pci_decompose_1(uint32_t t, int *bus, int *dev, int *func, int *reg) |
80 |
dpavlin |
20 |
{ |
81 |
dpavlin |
22 |
*bus = (t >> 16) & 0xff; |
82 |
|
|
*dev = (t >> 11) & 0x1f; |
83 |
|
|
*func = (t >> 8) & 0x7; |
84 |
|
|
*reg = t & 0xff; |
85 |
|
|
|
86 |
|
|
/* Warn about unaligned register access: */ |
87 |
|
|
if (t & 3) |
88 |
|
|
fatal("[ bus_pci_decompose_1: WARNING: reg = 0x%02x ]\n", |
89 |
|
|
t & 0xff); |
90 |
dpavlin |
20 |
} |
91 |
|
|
|
92 |
|
|
|
93 |
dpavlin |
4 |
/* |
94 |
dpavlin |
20 |
* bus_pci_data_access(): |
95 |
|
|
* |
96 |
dpavlin |
22 |
* Reads from or writes to the PCI configuration registers of a device. |
97 |
dpavlin |
20 |
*/ |
98 |
dpavlin |
22 |
void bus_pci_data_access(struct cpu *cpu, struct pci_data *pci_data, |
99 |
|
|
uint64_t *data, int len, int writeflag) |
100 |
dpavlin |
20 |
{ |
101 |
|
|
struct pci_device *dev; |
102 |
|
|
unsigned char *cfg_base; |
103 |
|
|
uint64_t x, idata = *data; |
104 |
dpavlin |
22 |
int i; |
105 |
dpavlin |
20 |
|
106 |
|
|
/* Scan through the list of pci_device entries. */ |
107 |
|
|
dev = pci_data->first_device; |
108 |
|
|
while (dev != NULL) { |
109 |
dpavlin |
22 |
if (dev->bus == pci_data->cur_bus && |
110 |
|
|
dev->function == pci_data->cur_func && |
111 |
|
|
dev->device == pci_data->cur_device) |
112 |
dpavlin |
20 |
break; |
113 |
|
|
dev = dev->next; |
114 |
|
|
} |
115 |
|
|
|
116 |
|
|
/* No device? Then return emptiness. */ |
117 |
|
|
if (dev == NULL) { |
118 |
dpavlin |
22 |
if (writeflag == MEM_READ) { |
119 |
|
|
if (pci_data->cur_reg == 0) |
120 |
|
|
*data = -1; |
121 |
|
|
else |
122 |
|
|
*data = 0; |
123 |
|
|
} else { |
124 |
|
|
fatal("[ bus_pci_data_access(): write to non-existant" |
125 |
|
|
" device? ]\n"); |
126 |
|
|
} |
127 |
dpavlin |
20 |
return; |
128 |
|
|
} |
129 |
|
|
|
130 |
|
|
/* Return normal config data, or length data? */ |
131 |
|
|
if (pci_data->last_was_write_ffffffff && |
132 |
dpavlin |
22 |
pci_data->cur_reg >= PCI_MAPREG_START && |
133 |
|
|
pci_data->cur_reg <= PCI_MAPREG_END - 4) |
134 |
dpavlin |
20 |
cfg_base = dev->cfg_mem_size; |
135 |
|
|
else |
136 |
|
|
cfg_base = dev->cfg_mem; |
137 |
|
|
|
138 |
|
|
/* Read data as little-endian: */ |
139 |
|
|
x = 0; |
140 |
dpavlin |
22 |
for (i=len-1; i>=0; i--) { |
141 |
|
|
int ofs = pci_data->cur_reg + i; |
142 |
|
|
x <<= 8; |
143 |
|
|
x |= cfg_base[ofs & (PCI_CFG_MEM_SIZE - 1)]; |
144 |
dpavlin |
20 |
} |
145 |
|
|
|
146 |
|
|
/* Register write: */ |
147 |
|
|
if (writeflag == MEM_WRITE) { |
148 |
dpavlin |
22 |
debug("[ bus_pci: write to PCI DATA: data = 0x%08llx ]\n", |
149 |
dpavlin |
20 |
(long long)idata); |
150 |
dpavlin |
22 |
if (idata == 0xffffffffULL && |
151 |
|
|
pci_data->cur_reg >= PCI_MAPREG_START && |
152 |
|
|
pci_data->cur_reg <= PCI_MAPREG_END - 4) { |
153 |
dpavlin |
20 |
pci_data->last_was_write_ffffffff = 1; |
154 |
|
|
return; |
155 |
|
|
} |
156 |
dpavlin |
30 |
|
157 |
|
|
if (dev->cfg_reg_write != NULL) { |
158 |
|
|
dev->cfg_reg_write(dev, pci_data->cur_reg, *data); |
159 |
|
|
} else { |
160 |
|
|
/* Print a warning for unhandled writes: */ |
161 |
dpavlin |
20 |
debug("[ bus_pci: write to PCI DATA: data = 0x%08llx" |
162 |
dpavlin |
30 |
" (current value = 0x%08llx); NOT YET" |
163 |
dpavlin |
20 |
" SUPPORTED. bus %i, device %i, function %i (%s)" |
164 |
|
|
" register 0x%02x ]\n", (long long)idata, |
165 |
dpavlin |
22 |
(long long)x, pci_data->cur_bus, |
166 |
|
|
pci_data->cur_device, pci_data->cur_func, |
167 |
|
|
dev->name, pci_data->cur_reg); |
168 |
dpavlin |
30 |
|
169 |
|
|
/* Special warning, to detect if NetBSD's special |
170 |
|
|
detection of PCI devices fails: */ |
171 |
|
|
if (pci_data->cur_reg == PCI_COMMAND_STATUS_REG |
172 |
|
|
&& !((*data) & PCI_COMMAND_IO_ENABLE)) { |
173 |
|
|
fatal("\n[ NetBSD PCI detection stuff not" |
174 |
|
|
" yet implemented for device '%s' ]\n", |
175 |
|
|
dev->name); |
176 |
|
|
} |
177 |
dpavlin |
20 |
} |
178 |
|
|
return; |
179 |
|
|
} |
180 |
|
|
|
181 |
|
|
/* Register read: */ |
182 |
|
|
*data = x; |
183 |
|
|
|
184 |
|
|
pci_data->last_was_write_ffffffff = 0; |
185 |
|
|
|
186 |
dpavlin |
22 |
debug("[ bus_pci: read from PCI DATA, bus %i, device " |
187 |
dpavlin |
24 |
"%i, function %i (%s) register 0x%02x: (len=%i) 0x%08lx ]\n", |
188 |
|
|
pci_data->cur_bus, pci_data->cur_device, pci_data->cur_func, |
189 |
|
|
dev->name, pci_data->cur_reg, len, (long)*data); |
190 |
dpavlin |
20 |
} |
191 |
|
|
|
192 |
|
|
|
193 |
|
|
/* |
194 |
dpavlin |
22 |
* bus_pci_setaddr(): |
195 |
dpavlin |
4 |
* |
196 |
dpavlin |
22 |
* Sets the address in preparation for a PCI register transfer. |
197 |
dpavlin |
4 |
*/ |
198 |
dpavlin |
22 |
void bus_pci_setaddr(struct cpu *cpu, struct pci_data *pci_data, |
199 |
|
|
int bus, int device, int function, int reg) |
200 |
dpavlin |
4 |
{ |
201 |
dpavlin |
22 |
if (cpu == NULL || pci_data == NULL) { |
202 |
|
|
fatal("bus_pci_setaddr(): NULL ptr\n"); |
203 |
|
|
exit(1); |
204 |
dpavlin |
4 |
} |
205 |
|
|
|
206 |
dpavlin |
22 |
pci_data->cur_bus = bus; |
207 |
|
|
pci_data->cur_device = device; |
208 |
|
|
pci_data->cur_func = function; |
209 |
|
|
pci_data->cur_reg = reg; |
210 |
dpavlin |
56 |
debug("bus_pci_setaddr( bus %d device 0x%x func 0x%x reg 0x%x )\n", bus, device, function, reg ); |
211 |
dpavlin |
4 |
} |
212 |
|
|
|
213 |
|
|
|
214 |
|
|
/* |
215 |
|
|
* bus_pci_add(): |
216 |
|
|
* |
217 |
|
|
* Add a PCI device to a bus_pci device. |
218 |
|
|
*/ |
219 |
|
|
void bus_pci_add(struct machine *machine, struct pci_data *pci_data, |
220 |
|
|
struct memory *mem, int bus, int device, int function, |
221 |
dpavlin |
22 |
const char *name) |
222 |
dpavlin |
4 |
{ |
223 |
dpavlin |
20 |
struct pci_device *pd; |
224 |
|
|
int ofs; |
225 |
|
|
void (*init)(struct machine *, struct memory *, struct pci_device *); |
226 |
dpavlin |
4 |
|
227 |
dpavlin |
14 |
if (pci_data == NULL) { |
228 |
|
|
fatal("bus_pci_add(): pci_data == NULL!\n"); |
229 |
dpavlin |
34 |
abort(); |
230 |
dpavlin |
14 |
} |
231 |
|
|
|
232 |
dpavlin |
20 |
/* Find the PCI device: */ |
233 |
|
|
init = pci_lookup_initf(name); |
234 |
|
|
|
235 |
dpavlin |
4 |
/* Make sure this bus/device/function number isn't already in use: */ |
236 |
dpavlin |
20 |
pd = pci_data->first_device; |
237 |
|
|
while (pd != NULL) { |
238 |
|
|
if (pd->bus == bus && pd->device == device && |
239 |
|
|
pd->function == function) { |
240 |
dpavlin |
4 |
fatal("bus_pci_add(): (bus %i, device %i, function" |
241 |
|
|
" %i) already in use\n", bus, device, function); |
242 |
dpavlin |
20 |
exit(1); |
243 |
dpavlin |
4 |
} |
244 |
dpavlin |
20 |
pd = pd->next; |
245 |
dpavlin |
4 |
} |
246 |
|
|
|
247 |
dpavlin |
42 |
CHECK_ALLOCATION(pd = malloc(sizeof(struct pci_device))); |
248 |
dpavlin |
20 |
memset(pd, 0, sizeof(struct pci_device)); |
249 |
dpavlin |
4 |
|
250 |
|
|
/* Add the new device first in the PCI bus' chain: */ |
251 |
dpavlin |
20 |
pd->next = pci_data->first_device; |
252 |
|
|
pci_data->first_device = pd; |
253 |
dpavlin |
4 |
|
254 |
dpavlin |
42 |
CHECK_ALLOCATION(pd->name = strdup(name)); |
255 |
dpavlin |
20 |
pd->pcibus = pci_data; |
256 |
|
|
pd->bus = bus; |
257 |
|
|
pd->device = device; |
258 |
|
|
pd->function = function; |
259 |
|
|
|
260 |
|
|
/* |
261 |
|
|
* Initialize with some default values: |
262 |
|
|
* |
263 |
dpavlin |
22 |
* TODO: The command status register is best to set up per device. |
264 |
|
|
* The size registers should also be set up on a per-device basis. |
265 |
dpavlin |
20 |
*/ |
266 |
dpavlin |
22 |
PCI_SET_DATA(PCI_COMMAND_STATUS_REG, |
267 |
|
|
PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE); |
268 |
dpavlin |
20 |
for (ofs = PCI_MAPREG_START; ofs < PCI_MAPREG_END; ofs += 4) |
269 |
dpavlin |
22 |
PCI_SET_DATA_SIZE(ofs, 0x00100000 - 1); |
270 |
dpavlin |
20 |
|
271 |
|
|
if (init == NULL) { |
272 |
|
|
fatal("No init function for PCI device \"%s\"?\n", name); |
273 |
|
|
exit(1); |
274 |
|
|
} |
275 |
|
|
|
276 |
dpavlin |
4 |
/* Call the PCI device' init function: */ |
277 |
dpavlin |
20 |
init(machine, mem, pd); |
278 |
dpavlin |
4 |
} |
279 |
|
|
|
280 |
|
|
|
281 |
|
|
/* |
282 |
dpavlin |
20 |
* allocate_device_space(): |
283 |
|
|
* |
284 |
|
|
* Used by glue code (see below) to allocate space for a PCI device. |
285 |
|
|
* |
286 |
|
|
* The returned values in portp and memp are the actual (emulated) addresses |
287 |
|
|
* that the device should use. (Normally only one of these is actually used.) |
288 |
|
|
* |
289 |
|
|
* TODO: PCI irqs? |
290 |
|
|
*/ |
291 |
|
|
static void allocate_device_space(struct pci_device *pd, |
292 |
|
|
uint64_t portsize, uint64_t memsize, |
293 |
|
|
uint64_t *portp, uint64_t *memp) |
294 |
|
|
{ |
295 |
|
|
uint64_t port, mem; |
296 |
|
|
|
297 |
|
|
/* Calculate an aligned starting port: */ |
298 |
|
|
port = pd->pcibus->cur_pci_portbase; |
299 |
|
|
if (portsize != 0) { |
300 |
|
|
port = ((port - 1) | (portsize - 1)) + 1; |
301 |
|
|
pd->pcibus->cur_pci_portbase = port; |
302 |
dpavlin |
22 |
PCI_SET_DATA(PCI_MAPREG_START + pd->cur_mapreg_offset, |
303 |
|
|
port | PCI_MAPREG_TYPE_IO); |
304 |
|
|
PCI_SET_DATA_SIZE(PCI_MAPREG_START + pd->cur_mapreg_offset, |
305 |
dpavlin |
24 |
((portsize - 1) & ~0xf) | 0xd); |
306 |
dpavlin |
22 |
pd->cur_mapreg_offset += sizeof(uint32_t); |
307 |
dpavlin |
20 |
} |
308 |
|
|
|
309 |
|
|
/* Calculate an aligned starting memory location: */ |
310 |
|
|
mem = pd->pcibus->cur_pci_membase; |
311 |
|
|
if (memsize != 0) { |
312 |
|
|
mem = ((mem - 1) | (memsize - 1)) + 1; |
313 |
|
|
pd->pcibus->cur_pci_membase = mem; |
314 |
dpavlin |
22 |
PCI_SET_DATA(PCI_MAPREG_START + pd->cur_mapreg_offset, mem); |
315 |
|
|
PCI_SET_DATA_SIZE(PCI_MAPREG_START + pd->cur_mapreg_offset, |
316 |
dpavlin |
24 |
((memsize - 1) & ~0xf) | 0x0); |
317 |
dpavlin |
22 |
pd->cur_mapreg_offset += sizeof(uint32_t); |
318 |
dpavlin |
20 |
} |
319 |
|
|
|
320 |
|
|
*portp = port + pd->pcibus->pci_actual_io_offset; |
321 |
|
|
*memp = mem + pd->pcibus->pci_actual_mem_offset; |
322 |
|
|
|
323 |
|
|
if (verbose >= 2) { |
324 |
|
|
debug("pci device '%s' at", pd->name); |
325 |
|
|
if (portsize != 0) |
326 |
|
|
debug(" port 0x%llx-0x%llx", (long long)pd->pcibus-> |
327 |
|
|
cur_pci_portbase, (long long)(pd->pcibus-> |
328 |
|
|
cur_pci_portbase + portsize - 1)); |
329 |
|
|
if (memsize != 0) |
330 |
|
|
debug(" mem 0x%llx-0x%llx", (long long)pd->pcibus-> |
331 |
|
|
cur_pci_membase, (long long)(pd->pcibus-> |
332 |
|
|
cur_pci_membase + memsize - 1)); |
333 |
|
|
debug("\n"); |
334 |
|
|
} |
335 |
|
|
|
336 |
|
|
pd->pcibus->cur_pci_portbase += portsize; |
337 |
|
|
pd->pcibus->cur_pci_membase += memsize; |
338 |
|
|
} |
339 |
|
|
|
340 |
|
|
|
341 |
|
|
/* |
342 |
dpavlin |
4 |
* bus_pci_init(): |
343 |
|
|
* |
344 |
|
|
* This doesn't register a device, but instead returns a pointer to a struct |
345 |
dpavlin |
22 |
* which should be passed to other bus_pci functions when accessing the bus. |
346 |
dpavlin |
20 |
* |
347 |
dpavlin |
34 |
* irq_path is the interrupt path to the PCI controller. |
348 |
dpavlin |
20 |
* |
349 |
|
|
* pci_portbase, pci_membase, and pci_irqbase are the port, memory, and |
350 |
|
|
* interrupt bases for PCI devices (as found in the configuration registers). |
351 |
|
|
* |
352 |
|
|
* pci_actual_io_offset and pci_actual_mem_offset are the offset from |
353 |
|
|
* the values in the configuration registers to the actual (emulated) device. |
354 |
|
|
* |
355 |
|
|
* isa_portbase, isa_membase, and isa_irqbase are the port, memory, and |
356 |
|
|
* interrupt bases for legacy ISA devices. |
357 |
dpavlin |
4 |
*/ |
358 |
dpavlin |
34 |
struct pci_data *bus_pci_init(struct machine *machine, char *irq_path, |
359 |
dpavlin |
20 |
uint64_t pci_actual_io_offset, uint64_t pci_actual_mem_offset, |
360 |
dpavlin |
34 |
uint64_t pci_portbase, uint64_t pci_membase, char *pci_irqbase, |
361 |
|
|
uint64_t isa_portbase, uint64_t isa_membase, char *isa_irqbase) |
362 |
dpavlin |
4 |
{ |
363 |
|
|
struct pci_data *d; |
364 |
|
|
|
365 |
dpavlin |
42 |
CHECK_ALLOCATION(d = malloc(sizeof(struct pci_data))); |
366 |
dpavlin |
4 |
memset(d, 0, sizeof(struct pci_data)); |
367 |
dpavlin |
34 |
|
368 |
dpavlin |
42 |
CHECK_ALLOCATION(d->irq_path = strdup(irq_path)); |
369 |
|
|
CHECK_ALLOCATION(d->irq_path_isa = strdup(isa_irqbase)); |
370 |
|
|
CHECK_ALLOCATION(d->irq_path_pci = strdup(pci_irqbase)); |
371 |
dpavlin |
34 |
|
372 |
dpavlin |
20 |
d->pci_actual_io_offset = pci_actual_io_offset; |
373 |
|
|
d->pci_actual_mem_offset = pci_actual_mem_offset; |
374 |
|
|
d->pci_portbase = pci_portbase; |
375 |
|
|
d->pci_membase = pci_membase; |
376 |
|
|
d->isa_portbase = isa_portbase; |
377 |
|
|
d->isa_membase = isa_membase; |
378 |
dpavlin |
4 |
|
379 |
dpavlin |
40 |
d->cur_pci_portbase = d->pci_portbase; |
380 |
|
|
d->cur_pci_membase = d->pci_membase; |
381 |
|
|
|
382 |
dpavlin |
20 |
/* Assume that the first 64KB could be used by legacy ISA devices: */ |
383 |
dpavlin |
40 |
if (d->isa_portbase != 0 || d->isa_membase != 0) { |
384 |
|
|
d->cur_pci_portbase += 0x10000; |
385 |
|
|
d->cur_pci_membase += 0x10000; |
386 |
|
|
} |
387 |
dpavlin |
20 |
|
388 |
dpavlin |
56 |
debug("bus_pci_init( pci_actual_io_offset %x pci_actual_mem_offset 0x%x pci_portbase 0x%x pci_membase 0x%x isa_portbase %x isa_membase %x )\n", pci_actual_io_offset, pci_actual_mem_offset, pci_portbase, pci_membase, isa_portbase, isa_membase ); |
389 |
|
|
|
390 |
dpavlin |
4 |
return d; |
391 |
|
|
} |
392 |
|
|
|
393 |
dpavlin |
20 |
|
394 |
|
|
|
395 |
|
|
/****************************************************************************** |
396 |
dpavlin |
22 |
* * |
397 |
|
|
* The following is glue code for PCI controllers and devices. The glue * |
398 |
|
|
* code does the minimal stuff necessary to get an emulated OS to detect * |
399 |
|
|
* the device (i.e. set up PCI configuration registers), and then if * |
400 |
|
|
* necessary adds a "normal" device. * |
401 |
|
|
* * |
402 |
dpavlin |
20 |
******************************************************************************/ |
403 |
|
|
|
404 |
|
|
|
405 |
|
|
|
406 |
|
|
/* |
407 |
dpavlin |
30 |
* Integraphics Systems "igsfb" Framebuffer (graphics) card, used in at |
408 |
|
|
* least the NetWinder. |
409 |
dpavlin |
20 |
*/ |
410 |
|
|
|
411 |
|
|
#define PCI_VENDOR_INTEGRAPHICS 0x10ea |
412 |
|
|
|
413 |
|
|
PCIINIT(igsfb) |
414 |
|
|
{ |
415 |
dpavlin |
30 |
char tmpstr[200]; |
416 |
|
|
|
417 |
dpavlin |
20 |
PCI_SET_DATA(PCI_ID_REG, |
418 |
|
|
PCI_ID_CODE(PCI_VENDOR_INTEGRAPHICS, 0x2010)); |
419 |
|
|
|
420 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, |
421 |
|
|
PCI_CLASS_CODE(PCI_CLASS_DISPLAY, |
422 |
|
|
PCI_SUBCLASS_DISPLAY_VGA, 0) + 0x01); |
423 |
|
|
|
424 |
|
|
/* TODO */ |
425 |
dpavlin |
22 |
PCI_SET_DATA(0x10, 0x08000000); |
426 |
dpavlin |
20 |
|
427 |
dpavlin |
30 |
snprintf(tmpstr, sizeof(tmpstr), "igsfb addr=0x%llx", |
428 |
|
|
(long long)(pd->pcibus->isa_membase + 0x08000000)); |
429 |
|
|
device_add(machine, tmpstr); |
430 |
dpavlin |
20 |
} |
431 |
|
|
|
432 |
|
|
|
433 |
|
|
|
434 |
|
|
/* |
435 |
|
|
* S3 ViRGE graphics. |
436 |
|
|
* |
437 |
|
|
* TODO: Only emulates a standard VGA card, so far. |
438 |
|
|
*/ |
439 |
|
|
|
440 |
|
|
#define PCI_VENDOR_S3 0x5333 |
441 |
|
|
#define PCI_PRODUCT_S3_VIRGE 0x5631 |
442 |
|
|
#define PCI_PRODUCT_S3_VIRGE_DX 0x8a01 |
443 |
|
|
|
444 |
|
|
PCIINIT(s3_virge) |
445 |
|
|
{ |
446 |
|
|
PCI_SET_DATA(PCI_ID_REG, |
447 |
|
|
PCI_ID_CODE(PCI_VENDOR_S3, PCI_PRODUCT_S3_VIRGE_DX)); |
448 |
|
|
|
449 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, |
450 |
|
|
PCI_CLASS_CODE(PCI_CLASS_DISPLAY, |
451 |
|
|
PCI_SUBCLASS_DISPLAY_VGA, 0) + 0x01); |
452 |
|
|
|
453 |
|
|
dev_vga_init(machine, mem, pd->pcibus->isa_membase + 0xa0000, |
454 |
|
|
pd->pcibus->isa_portbase + 0x3c0, machine->machine_name); |
455 |
|
|
} |
456 |
|
|
|
457 |
|
|
|
458 |
|
|
|
459 |
|
|
/* |
460 |
|
|
* Acer Labs M5229 PCI-IDE (UDMA) controller. |
461 |
|
|
* Acer Labs M1543 PCI->ISA bridge. |
462 |
|
|
*/ |
463 |
|
|
|
464 |
|
|
#define PCI_VENDOR_ALI 0x10b9 |
465 |
|
|
#define PCI_PRODUCT_ALI_M1543 0x1533 /* NOTE: not 1543 */ |
466 |
|
|
#define PCI_PRODUCT_ALI_M5229 0x5229 |
467 |
|
|
|
468 |
|
|
PCIINIT(ali_m1543) |
469 |
|
|
{ |
470 |
|
|
PCI_SET_DATA(PCI_ID_REG, |
471 |
|
|
PCI_ID_CODE(PCI_VENDOR_ALI, PCI_PRODUCT_ALI_M1543)); |
472 |
|
|
|
473 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
474 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0xc3); |
475 |
|
|
|
476 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
477 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
478 |
|
|
|
479 |
|
|
/* Linux uses these to detect which IRQ the IDE controller uses: */ |
480 |
|
|
PCI_SET_DATA(0x44, 0x0000000e); |
481 |
|
|
PCI_SET_DATA(0x58, 0x00000003); |
482 |
dpavlin |
34 |
|
483 |
|
|
switch (machine->machine_type) { |
484 |
|
|
case MACHINE_CATS: |
485 |
|
|
bus_isa_init(machine, pd->pcibus->irq_path_isa, |
486 |
|
|
BUS_ISA_PCKBC_FORCE_USE | BUS_ISA_PCKBC_NONPCSTYLE, |
487 |
|
|
0x7c000000, 0x80000000); |
488 |
|
|
break; |
489 |
|
|
default:fatal("ali_m1543 init: unimplemented machine type\n"); |
490 |
|
|
exit(1); |
491 |
|
|
} |
492 |
dpavlin |
20 |
} |
493 |
|
|
|
494 |
|
|
PCIINIT(ali_m5229) |
495 |
|
|
{ |
496 |
dpavlin |
34 |
char tmpstr[300], irqstr[300]; |
497 |
dpavlin |
20 |
|
498 |
|
|
PCI_SET_DATA(PCI_ID_REG, |
499 |
|
|
PCI_ID_CODE(PCI_VENDOR_ALI, PCI_PRODUCT_ALI_M5229)); |
500 |
|
|
|
501 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
502 |
|
|
PCI_SUBCLASS_MASS_STORAGE_IDE, 0x60) + 0xc1); |
503 |
|
|
|
504 |
dpavlin |
34 |
switch (machine->machine_type) { |
505 |
|
|
case MACHINE_CATS: |
506 |
|
|
/* CATS ISA interrupts are at footbridge irq 10: */ |
507 |
|
|
snprintf(irqstr, sizeof(irqstr), "%s.10.isa", |
508 |
|
|
pd->pcibus->irq_path); |
509 |
|
|
break; |
510 |
|
|
default:fatal("ali_m5229 init: unimplemented machine type\n"); |
511 |
|
|
exit(1); |
512 |
|
|
} |
513 |
|
|
|
514 |
dpavlin |
20 |
if (diskimage_exist(machine, 0, DISKIMAGE_IDE) || |
515 |
|
|
diskimage_exist(machine, 1, DISKIMAGE_IDE)) { |
516 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s.%i", |
517 |
dpavlin |
20 |
(long long)(pd->pcibus->isa_portbase + 0x1f0), |
518 |
dpavlin |
34 |
irqstr, 14); |
519 |
dpavlin |
20 |
device_add(machine, tmpstr); |
520 |
|
|
} |
521 |
|
|
|
522 |
|
|
/* The secondary channel is disabled. TODO: fix this. */ |
523 |
|
|
} |
524 |
|
|
|
525 |
|
|
|
526 |
|
|
|
527 |
|
|
/* |
528 |
|
|
* Adaptec AHC SCSI controller. |
529 |
|
|
*/ |
530 |
|
|
|
531 |
|
|
#define PCI_VENDOR_ADP 0x9004 /* Adaptec */ |
532 |
|
|
#define PCI_VENDOR_ADP2 0x9005 /* Adaptec (2nd PCI Vendor ID) */ |
533 |
|
|
#define PCI_PRODUCT_ADP_2940U 0x8178 /* AHA-2940 Ultra */ |
534 |
|
|
#define PCI_PRODUCT_ADP_2940UP 0x8778 /* AHA-2940 Ultra Pro */ |
535 |
|
|
|
536 |
|
|
PCIINIT(ahc) |
537 |
|
|
{ |
538 |
|
|
/* Numbers taken from a Adaptec 2940U: */ |
539 |
|
|
/* http://mail-index.netbsd.org/netbsd-bugs/2000/04/29/0000.html */ |
540 |
|
|
|
541 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_ADP, |
542 |
|
|
PCI_PRODUCT_ADP_2940U)); |
543 |
|
|
|
544 |
|
|
PCI_SET_DATA(PCI_COMMAND_STATUS_REG, 0x02900007); |
545 |
|
|
|
546 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
547 |
|
|
PCI_SUBCLASS_MASS_STORAGE_SCSI, 0) + 0x01); |
548 |
|
|
|
549 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, 0x00004008); |
550 |
|
|
|
551 |
|
|
/* 1 = type i/o. 0x0000e801; address? */ |
552 |
|
|
/* second address reg = 0xf1002000? */ |
553 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x00, 0x00000001); |
554 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x04, 0x00000000); |
555 |
|
|
|
556 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x08, 0x00000000); |
557 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x0c, 0x00000000); |
558 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x10, 0x00000000); |
559 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x14, 0x00000000); |
560 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x18, 0x00000000); |
561 |
|
|
|
562 |
|
|
/* Subsystem vendor ID? 0x78819004? */ |
563 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x1c, 0x00000000); |
564 |
|
|
|
565 |
|
|
PCI_SET_DATA(0x30, 0xef000000); |
566 |
|
|
PCI_SET_DATA(PCI_CAPLISTPTR_REG, 0x000000dc); |
567 |
|
|
PCI_SET_DATA(0x38, 0x00000000); |
568 |
|
|
PCI_SET_DATA(PCI_INTERRUPT_REG, 0x08080109); /* interrupt pin A */ |
569 |
|
|
|
570 |
|
|
/* |
571 |
|
|
* TODO: this address is based on what NetBSD/sgimips uses |
572 |
|
|
* on SGI IP32 (O2). Fix this! |
573 |
|
|
*/ |
574 |
|
|
|
575 |
|
|
device_add(machine, "ahc addr=0x18000000"); |
576 |
|
|
|
577 |
|
|
/* OpenBSD/sgi snapshots sometime between 2005-03-11 and |
578 |
|
|
2005-04-04 changed to using 0x1a000000: */ |
579 |
|
|
dev_ram_init(machine, 0x1a000000, 0x2000000, DEV_RAM_MIRROR, |
580 |
|
|
0x18000000); |
581 |
|
|
} |
582 |
|
|
|
583 |
|
|
|
584 |
|
|
|
585 |
|
|
/* |
586 |
|
|
* Galileo Technology GT-64xxx PCI controller. |
587 |
|
|
* |
588 |
|
|
* GT-64011 Used in Cobalt machines. |
589 |
|
|
* GT-64120 Used in evbmips machines (Malta). |
590 |
|
|
* |
591 |
|
|
* NOTE: This works in the opposite way compared to other devices; the PCI |
592 |
|
|
* device is added from the normal device instead of the other way around. |
593 |
|
|
*/ |
594 |
|
|
|
595 |
|
|
#define PCI_VENDOR_GALILEO 0x11ab /* Galileo Technology */ |
596 |
|
|
#define PCI_PRODUCT_GALILEO_GT64011 0x4146 /* GT-64011 System Controller */ |
597 |
|
|
#define PCI_PRODUCT_GALILEO_GT64120 0x4620 /* GT-64120 */ |
598 |
dpavlin |
22 |
#define PCI_PRODUCT_GALILEO_GT64260 0x6430 /* GT-64260 */ |
599 |
dpavlin |
20 |
|
600 |
|
|
PCIINIT(gt64011) |
601 |
|
|
{ |
602 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_GALILEO, |
603 |
|
|
PCI_PRODUCT_GALILEO_GT64011)); |
604 |
|
|
|
605 |
dpavlin |
22 |
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
606 |
dpavlin |
20 |
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x01); /* Revision 1 */ |
607 |
|
|
} |
608 |
|
|
|
609 |
|
|
PCIINIT(gt64120) |
610 |
|
|
{ |
611 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_GALILEO, |
612 |
|
|
PCI_PRODUCT_GALILEO_GT64120)); |
613 |
|
|
|
614 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
615 |
|
|
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x02); /* Revision 2? */ |
616 |
|
|
|
617 |
|
|
switch (machine->machine_type) { |
618 |
|
|
case MACHINE_EVBMIPS: |
619 |
|
|
PCI_SET_DATA(PCI_MAPREG_START + 0x10, 0x1be00000); |
620 |
|
|
break; |
621 |
|
|
} |
622 |
|
|
} |
623 |
|
|
|
624 |
dpavlin |
22 |
PCIINIT(gt64260) |
625 |
|
|
{ |
626 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_GALILEO, |
627 |
|
|
PCI_PRODUCT_GALILEO_GT64260)); |
628 |
dpavlin |
20 |
|
629 |
dpavlin |
22 |
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
630 |
|
|
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x01); /* Revision 1? */ |
631 |
|
|
} |
632 |
dpavlin |
20 |
|
633 |
dpavlin |
22 |
|
634 |
|
|
|
635 |
dpavlin |
20 |
/* |
636 |
dpavlin |
30 |
* AMD PCnet Ethernet card. |
637 |
|
|
* |
638 |
|
|
* "Am79c970A PCnet-PCI II rev 0" or similar. |
639 |
|
|
*/ |
640 |
|
|
|
641 |
|
|
#define PCI_VENDOR_AMD 0x1022 /* Advanced Micro Devices */ |
642 |
|
|
#define PCI_PRODUCT_AMD_PCNET_PCI 0x2000 /* PCnet-PCI Ethernet */ |
643 |
|
|
|
644 |
|
|
PCIINIT(pcn) |
645 |
|
|
{ |
646 |
|
|
int irq; |
647 |
|
|
|
648 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_AMD, |
649 |
|
|
PCI_PRODUCT_AMD_PCNET_PCI)); |
650 |
|
|
|
651 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_NETWORK, |
652 |
|
|
PCI_SUBCLASS_NETWORK_ETHERNET, 0) + 0x00); /* Revision 0 */ |
653 |
|
|
|
654 |
|
|
switch (machine->machine_type) { |
655 |
|
|
|
656 |
|
|
case MACHINE_EVBMIPS: |
657 |
|
|
irq = (1 << 8) + 10; /* TODO */ |
658 |
|
|
break; |
659 |
|
|
|
660 |
|
|
default:fatal("pcn in non-implemented machine type %i\n", |
661 |
|
|
machine->machine_type); |
662 |
|
|
exit(1); |
663 |
|
|
} |
664 |
|
|
|
665 |
|
|
PCI_SET_DATA(PCI_INTERRUPT_REG, 0x01100000 | irq); |
666 |
|
|
|
667 |
|
|
/* |
668 |
|
|
* TODO: Add the pcn device here. The pcn device will need to work as |
669 |
|
|
* a wrapper for dev_le + all the DMA magic and whatever is required. |
670 |
|
|
* It's too much to implement right now. |
671 |
|
|
*/ |
672 |
|
|
} |
673 |
|
|
|
674 |
|
|
|
675 |
|
|
|
676 |
|
|
/* |
677 |
dpavlin |
22 |
* Intel 31244 Serial ATA Controller |
678 |
|
|
* Intel 82371SB PIIX3 PCI-ISA bridge |
679 |
|
|
* Intel 82371AB PIIX4 PCI-ISA bridge |
680 |
|
|
* Intel 82371SB IDE controller |
681 |
|
|
* Intel 82371AB IDE controller |
682 |
|
|
* Intel 82378ZB System I/O controller. |
683 |
dpavlin |
20 |
*/ |
684 |
|
|
|
685 |
|
|
#define PCI_VENDOR_INTEL 0x8086 |
686 |
dpavlin |
22 |
#define PCI_PRODUCT_INTEL_31244 0x3200 |
687 |
|
|
#define PCI_PRODUCT_INTEL_82371SB_ISA 0x7000 |
688 |
|
|
#define PCI_PRODUCT_INTEL_82371SB_IDE 0x7010 |
689 |
dpavlin |
20 |
#define PCI_PRODUCT_INTEL_82371AB_ISA 0x7110 |
690 |
|
|
#define PCI_PRODUCT_INTEL_82371AB_IDE 0x7111 |
691 |
|
|
#define PCI_PRODUCT_INTEL_SIO 0x0484 |
692 |
|
|
|
693 |
dpavlin |
22 |
PCIINIT(i31244) |
694 |
dpavlin |
20 |
{ |
695 |
dpavlin |
22 |
uint64_t port, memaddr; |
696 |
dpavlin |
24 |
int irq = 0; |
697 |
dpavlin |
22 |
|
698 |
dpavlin |
20 |
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL, |
699 |
dpavlin |
22 |
PCI_PRODUCT_INTEL_31244)); |
700 |
|
|
|
701 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
702 |
|
|
PCI_SUBCLASS_MASS_STORAGE_IDE, 0x33) + 0x00); |
703 |
|
|
|
704 |
|
|
switch (machine->machine_type) { |
705 |
|
|
case MACHINE_IQ80321: |
706 |
dpavlin |
24 |
/* S-PCI-X slot uses PCI IRQ A, int 29 */ |
707 |
|
|
irq = (1 << 8) + 29; |
708 |
dpavlin |
22 |
break; |
709 |
|
|
default:fatal("i31244 in non-implemented machine type %i\n", |
710 |
|
|
machine->machine_type); |
711 |
|
|
exit(1); |
712 |
|
|
} |
713 |
|
|
|
714 |
dpavlin |
24 |
PCI_SET_DATA(PCI_INTERRUPT_REG, 0x01100000 | irq); |
715 |
dpavlin |
22 |
|
716 |
dpavlin |
24 |
allocate_device_space(pd, 0x1000, 0, &port, &memaddr); |
717 |
|
|
allocate_device_space(pd, 0x1000, 0, &port, &memaddr); |
718 |
dpavlin |
22 |
|
719 |
|
|
/* PCI IDE using dev_wdc: */ |
720 |
|
|
if (diskimage_exist(machine, 0, DISKIMAGE_IDE) || |
721 |
|
|
diskimage_exist(machine, 1, DISKIMAGE_IDE)) { |
722 |
|
|
char tmpstr[150]; |
723 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s.%i", |
724 |
dpavlin |
22 |
(long long)(pd->pcibus->pci_actual_io_offset + 0), |
725 |
dpavlin |
34 |
pd->pcibus->irq_path_pci, irq & 255); |
726 |
dpavlin |
22 |
device_add(machine, tmpstr); |
727 |
|
|
} |
728 |
|
|
} |
729 |
|
|
|
730 |
|
|
PCIINIT(piix3_isa) |
731 |
|
|
{ |
732 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL, |
733 |
|
|
PCI_PRODUCT_INTEL_82371SB_ISA)); |
734 |
|
|
|
735 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
736 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x01); /* Rev 1 */ |
737 |
|
|
|
738 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
739 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
740 |
|
|
} |
741 |
|
|
|
742 |
|
|
PCIINIT(piix4_isa) |
743 |
|
|
{ |
744 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL, |
745 |
dpavlin |
20 |
PCI_PRODUCT_INTEL_82371AB_ISA)); |
746 |
|
|
|
747 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
748 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x01); /* Rev 1 */ |
749 |
|
|
|
750 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
751 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
752 |
|
|
} |
753 |
|
|
|
754 |
|
|
PCIINIT(i82378zb) |
755 |
|
|
{ |
756 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL, |
757 |
|
|
PCI_PRODUCT_INTEL_SIO)); |
758 |
|
|
|
759 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
760 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x43); |
761 |
|
|
|
762 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
763 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
764 |
dpavlin |
22 |
|
765 |
|
|
PCI_SET_DATA(0x40, 0x20); |
766 |
|
|
|
767 |
|
|
/* PIRQ[0]=10 PIRQ[1]=11 PIRQ[2]=14 PIRQ[3]=15 */ |
768 |
|
|
PCI_SET_DATA(0x60, 0x0f0e0b0a); |
769 |
dpavlin |
20 |
} |
770 |
|
|
|
771 |
dpavlin |
30 |
struct piix_ide_extra { |
772 |
|
|
void *wdc0; |
773 |
|
|
void *wdc1; |
774 |
|
|
}; |
775 |
|
|
|
776 |
|
|
int piix_ide_cfg_reg_write(struct pci_device *pd, int reg, uint32_t value) |
777 |
|
|
{ |
778 |
|
|
void *wdc0 = ((struct piix_ide_extra *)pd->extra)->wdc0; |
779 |
|
|
void *wdc1 = ((struct piix_ide_extra *)pd->extra)->wdc1; |
780 |
|
|
int enabled = 0; |
781 |
|
|
|
782 |
|
|
switch (reg) { |
783 |
|
|
case PCI_COMMAND_STATUS_REG: |
784 |
|
|
if (value & PCI_COMMAND_IO_ENABLE) |
785 |
|
|
enabled = 1; |
786 |
|
|
if (wdc0 != NULL) |
787 |
|
|
wdc_set_io_enabled(wdc0, enabled); |
788 |
|
|
if (wdc1 != NULL) |
789 |
|
|
wdc_set_io_enabled(wdc1, enabled); |
790 |
|
|
return 1; |
791 |
|
|
} |
792 |
|
|
|
793 |
|
|
return 0; |
794 |
|
|
} |
795 |
|
|
|
796 |
dpavlin |
22 |
PCIINIT(piix3_ide) |
797 |
dpavlin |
20 |
{ |
798 |
|
|
char tmpstr[100]; |
799 |
|
|
|
800 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL, |
801 |
dpavlin |
22 |
PCI_PRODUCT_INTEL_82371SB_IDE)); |
802 |
|
|
|
803 |
|
|
/* Possibly not correct: */ |
804 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
805 |
|
|
PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x00); |
806 |
|
|
|
807 |
|
|
/* PIIX_IDETIM (see NetBSD's pciide_piix_reg.h) */ |
808 |
|
|
/* channel 0 and 1 enabled as IDE */ |
809 |
|
|
PCI_SET_DATA(0x40, 0x80008000); |
810 |
|
|
|
811 |
dpavlin |
42 |
CHECK_ALLOCATION(pd->extra = malloc(sizeof(struct piix_ide_extra))); |
812 |
dpavlin |
30 |
((struct piix_ide_extra *)pd->extra)->wdc0 = NULL; |
813 |
|
|
((struct piix_ide_extra *)pd->extra)->wdc1 = NULL; |
814 |
|
|
|
815 |
dpavlin |
22 |
if (diskimage_exist(machine, 0, DISKIMAGE_IDE) || |
816 |
|
|
diskimage_exist(machine, 1, DISKIMAGE_IDE)) { |
817 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx " |
818 |
|
|
"irq=%s.isa.%i", (long long)(pd->pcibus->isa_portbase + |
819 |
|
|
0x1f0), pd->pcibus->irq_path_isa, 14); |
820 |
dpavlin |
30 |
((struct piix_ide_extra *)pd->extra)->wdc0 = |
821 |
|
|
device_add(machine, tmpstr); |
822 |
dpavlin |
22 |
} |
823 |
|
|
|
824 |
|
|
if (diskimage_exist(machine, 2, DISKIMAGE_IDE) || |
825 |
|
|
diskimage_exist(machine, 3, DISKIMAGE_IDE)) { |
826 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx " |
827 |
|
|
"irq=%s.isa.%i", (long long)(pd->pcibus->isa_portbase + |
828 |
|
|
0x170), pd->pcibus->irq_path_isa, 15); |
829 |
dpavlin |
30 |
((struct piix_ide_extra *)pd->extra)->wdc1 = |
830 |
|
|
device_add(machine, tmpstr); |
831 |
dpavlin |
22 |
} |
832 |
dpavlin |
30 |
|
833 |
|
|
pd->cfg_reg_write = piix_ide_cfg_reg_write; |
834 |
dpavlin |
22 |
} |
835 |
|
|
|
836 |
|
|
PCIINIT(piix4_ide) |
837 |
|
|
{ |
838 |
|
|
char tmpstr[100]; |
839 |
|
|
|
840 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL, |
841 |
dpavlin |
20 |
PCI_PRODUCT_INTEL_82371AB_IDE)); |
842 |
|
|
|
843 |
|
|
/* Possibly not correct: */ |
844 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
845 |
|
|
PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x01); |
846 |
|
|
|
847 |
|
|
/* PIIX_IDETIM (see NetBSD's pciide_piix_reg.h) */ |
848 |
|
|
/* channel 0 and 1 enabled as IDE */ |
849 |
|
|
PCI_SET_DATA(0x40, 0x80008000); |
850 |
|
|
|
851 |
dpavlin |
42 |
CHECK_ALLOCATION(pd->extra = malloc(sizeof(struct piix_ide_extra))); |
852 |
dpavlin |
30 |
((struct piix_ide_extra *)pd->extra)->wdc0 = NULL; |
853 |
|
|
((struct piix_ide_extra *)pd->extra)->wdc1 = NULL; |
854 |
|
|
|
855 |
dpavlin |
20 |
if (diskimage_exist(machine, 0, DISKIMAGE_IDE) || |
856 |
|
|
diskimage_exist(machine, 1, DISKIMAGE_IDE)) { |
857 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s." |
858 |
|
|
"isa.%i", (long long)(pd->pcibus->isa_portbase + 0x1f0), |
859 |
|
|
pd->pcibus->irq_path_isa, 14); |
860 |
dpavlin |
30 |
((struct piix_ide_extra *)pd->extra)->wdc0 = |
861 |
|
|
device_add(machine, tmpstr); |
862 |
dpavlin |
20 |
} |
863 |
|
|
|
864 |
|
|
if (diskimage_exist(machine, 2, DISKIMAGE_IDE) || |
865 |
|
|
diskimage_exist(machine, 3, DISKIMAGE_IDE)) { |
866 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s." |
867 |
|
|
"isa.%i", (long long)(pd->pcibus->isa_portbase + 0x170), |
868 |
|
|
pd->pcibus->irq_path_isa, 15); |
869 |
dpavlin |
30 |
((struct piix_ide_extra *)pd->extra)->wdc1 = |
870 |
|
|
device_add(machine, tmpstr); |
871 |
dpavlin |
20 |
} |
872 |
dpavlin |
30 |
|
873 |
|
|
pd->cfg_reg_write = piix_ide_cfg_reg_write; |
874 |
dpavlin |
20 |
} |
875 |
|
|
|
876 |
|
|
|
877 |
|
|
|
878 |
|
|
/* |
879 |
|
|
* IBM ISA bridge (used by at least one PReP machine). |
880 |
|
|
*/ |
881 |
|
|
|
882 |
|
|
#define PCI_VENDOR_IBM 0x1014 |
883 |
|
|
#define PCI_PRODUCT_IBM_ISABRIDGE 0x000a |
884 |
|
|
|
885 |
|
|
PCIINIT(ibm_isa) |
886 |
|
|
{ |
887 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_IBM, |
888 |
|
|
PCI_PRODUCT_IBM_ISABRIDGE)); |
889 |
|
|
|
890 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
891 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x02); |
892 |
|
|
|
893 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
894 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
895 |
|
|
} |
896 |
|
|
|
897 |
|
|
|
898 |
|
|
|
899 |
|
|
/* |
900 |
|
|
* Heuricon PCI host bridge for PM/PPC. |
901 |
|
|
*/ |
902 |
|
|
|
903 |
|
|
#define PCI_VENDOR_HEURICON 0x1223 |
904 |
|
|
#define PCI_PRODUCT_HEURICON_PMPPC 0x000e |
905 |
|
|
|
906 |
|
|
PCIINIT(heuricon_pmppc) |
907 |
|
|
{ |
908 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_HEURICON, |
909 |
|
|
PCI_PRODUCT_HEURICON_PMPPC)); |
910 |
|
|
|
911 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
912 |
|
|
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x00); /* Revision? */ |
913 |
|
|
|
914 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
915 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
916 |
|
|
} |
917 |
|
|
|
918 |
dpavlin |
56 |
/* |
919 |
dpavlin |
61 |
* Sandpoint host bridge based on uninorth |
920 |
dpavlin |
56 |
*/ |
921 |
dpavlin |
20 |
|
922 |
dpavlin |
56 |
#define PCI_VENDOR_MOT 0x1057 |
923 |
|
|
#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002 |
924 |
|
|
#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004 |
925 |
dpavlin |
20 |
|
926 |
dpavlin |
61 |
PCIINIT(mpc10x) |
927 |
dpavlin |
56 |
{ |
928 |
|
|
debug("sandpoint mpx10x host bridge\n"); |
929 |
|
|
|
930 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_MOT, |
931 |
dpavlin |
61 |
PCI_DEVICE_ID_MOTOROLA_MPC106)); /* FIXME MPC106 ?? */ |
932 |
dpavlin |
56 |
|
933 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
934 |
|
|
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x00); /* Revision? */ |
935 |
|
|
|
936 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
937 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
938 |
dpavlin |
61 |
|
939 |
|
|
/* TODO */ |
940 |
|
|
//allocate_device_space(pd, 0x10000, 0x10000, &port, &memaddr); |
941 |
|
|
|
942 |
|
|
|
943 |
dpavlin |
56 |
} |
944 |
|
|
|
945 |
|
|
|
946 |
|
|
|
947 |
dpavlin |
20 |
/* |
948 |
|
|
* VIATECH VT82C586 devices: |
949 |
|
|
* |
950 |
|
|
* vt82c586_isa PCI->ISA bridge |
951 |
|
|
* vt82c586_ide IDE controller |
952 |
|
|
* |
953 |
|
|
* TODO: This more or less just a dummy device, so far. |
954 |
|
|
*/ |
955 |
|
|
|
956 |
|
|
#define PCI_VENDOR_VIATECH 0x1106 /* VIA Technologies */ |
957 |
|
|
#define PCI_PRODUCT_VIATECH_VT82C586_IDE 0x1571 /* VT82C586 (Apollo VP) |
958 |
|
|
IDE Controller */ |
959 |
|
|
#define PCI_PRODUCT_VIATECH_VT82C586_ISA 0x0586 /* VT82C586 (Apollo VP) |
960 |
|
|
PCI-ISA Bridge */ |
961 |
|
|
|
962 |
|
|
PCIINIT(vt82c586_isa) |
963 |
|
|
{ |
964 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_VIATECH, |
965 |
|
|
PCI_PRODUCT_VIATECH_VT82C586_ISA)); |
966 |
|
|
|
967 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
968 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x39); /* Revision 37 or 39 */ |
969 |
|
|
|
970 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
971 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
972 |
|
|
} |
973 |
|
|
|
974 |
dpavlin |
30 |
struct vt82c586_ide_extra { |
975 |
|
|
void *wdc0; |
976 |
|
|
void *wdc1; |
977 |
|
|
}; |
978 |
|
|
|
979 |
|
|
int vt82c586_ide_cfg_reg_write(struct pci_device *pd, int reg, uint32_t value) |
980 |
|
|
{ |
981 |
|
|
void *wdc0 = ((struct vt82c586_ide_extra *)pd->extra)->wdc0; |
982 |
|
|
void *wdc1 = ((struct vt82c586_ide_extra *)pd->extra)->wdc1; |
983 |
|
|
int enabled = 0; |
984 |
|
|
|
985 |
|
|
switch (reg) { |
986 |
|
|
case PCI_COMMAND_STATUS_REG: |
987 |
|
|
if (value & PCI_COMMAND_IO_ENABLE) |
988 |
|
|
enabled = 1; |
989 |
|
|
if (wdc0 != NULL) |
990 |
|
|
wdc_set_io_enabled(wdc0, enabled); |
991 |
|
|
if (wdc1 != NULL) |
992 |
|
|
wdc_set_io_enabled(wdc1, enabled); |
993 |
|
|
return 1; |
994 |
|
|
} |
995 |
|
|
|
996 |
|
|
return 0; |
997 |
|
|
} |
998 |
|
|
|
999 |
dpavlin |
20 |
PCIINIT(vt82c586_ide) |
1000 |
|
|
{ |
1001 |
|
|
char tmpstr[100]; |
1002 |
|
|
|
1003 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_VIATECH, |
1004 |
|
|
PCI_PRODUCT_VIATECH_VT82C586_IDE)); |
1005 |
|
|
|
1006 |
|
|
/* Possibly not correct: */ |
1007 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
1008 |
|
|
PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x01); |
1009 |
|
|
|
1010 |
|
|
/* APO_IDECONF */ |
1011 |
|
|
/* channel 0 and 1 enabled */ |
1012 |
|
|
PCI_SET_DATA(0x40, 0x00000003); |
1013 |
|
|
|
1014 |
dpavlin |
42 |
CHECK_ALLOCATION(pd->extra = malloc(sizeof(struct vt82c586_ide_extra))); |
1015 |
dpavlin |
30 |
((struct vt82c586_ide_extra *)pd->extra)->wdc0 = NULL; |
1016 |
|
|
((struct vt82c586_ide_extra *)pd->extra)->wdc1 = NULL; |
1017 |
|
|
|
1018 |
dpavlin |
20 |
if (diskimage_exist(machine, 0, DISKIMAGE_IDE) || |
1019 |
|
|
diskimage_exist(machine, 1, DISKIMAGE_IDE)) { |
1020 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s." |
1021 |
|
|
"isa.%i", (long long)(pd->pcibus->isa_portbase + 0x1f0), |
1022 |
|
|
pd->pcibus->irq_path_isa, 14); |
1023 |
dpavlin |
30 |
((struct vt82c586_ide_extra *)pd->extra)->wdc0 = |
1024 |
|
|
device_add(machine, tmpstr); |
1025 |
dpavlin |
20 |
} |
1026 |
|
|
|
1027 |
|
|
if (diskimage_exist(machine, 2, DISKIMAGE_IDE) || |
1028 |
|
|
diskimage_exist(machine, 3, DISKIMAGE_IDE)) { |
1029 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s." |
1030 |
|
|
"isa.%i", (long long)(pd->pcibus->isa_portbase + 0x170), |
1031 |
|
|
pd->pcibus->irq_path_isa, 15); |
1032 |
dpavlin |
30 |
((struct vt82c586_ide_extra *)pd->extra)->wdc1 = |
1033 |
|
|
device_add(machine, tmpstr); |
1034 |
dpavlin |
20 |
} |
1035 |
dpavlin |
30 |
|
1036 |
|
|
pd->cfg_reg_write = vt82c586_ide_cfg_reg_write; |
1037 |
dpavlin |
20 |
} |
1038 |
|
|
|
1039 |
|
|
|
1040 |
|
|
|
1041 |
|
|
/* |
1042 |
|
|
* Symphony Labs 83C553 PCI->ISA bridge. |
1043 |
|
|
* Symphony Labs 82C105 PCIIDE controller. |
1044 |
|
|
*/ |
1045 |
|
|
|
1046 |
|
|
#define PCI_VENDOR_SYMPHONY 0x10ad |
1047 |
|
|
#define PCI_PRODUCT_SYMPHONY_83C553 0x0565 |
1048 |
|
|
#define PCI_PRODUCT_SYMPHONY_82C105 0x0105 |
1049 |
|
|
|
1050 |
|
|
PCIINIT(symphony_83c553) |
1051 |
|
|
{ |
1052 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_SYMPHONY, |
1053 |
|
|
PCI_PRODUCT_SYMPHONY_83C553)); |
1054 |
|
|
|
1055 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
1056 |
|
|
PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x10); |
1057 |
|
|
|
1058 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
1059 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
1060 |
dpavlin |
34 |
|
1061 |
|
|
switch (machine->machine_type) { |
1062 |
|
|
case MACHINE_NETWINDER: |
1063 |
|
|
bus_isa_init(machine, pd->pcibus->irq_path_isa, |
1064 |
|
|
0, 0x7c000000, 0x80000000); |
1065 |
|
|
break; |
1066 |
|
|
default:fatal("symphony_83c553 init: unimplemented machine type\n"); |
1067 |
|
|
exit(1); |
1068 |
|
|
} |
1069 |
dpavlin |
20 |
} |
1070 |
|
|
|
1071 |
dpavlin |
32 |
struct symphony_82c105_extra { |
1072 |
|
|
void *wdc0; |
1073 |
|
|
void *wdc1; |
1074 |
|
|
}; |
1075 |
|
|
|
1076 |
|
|
int symphony_82c105_cfg_reg_write(struct pci_device *pd, int reg, |
1077 |
|
|
uint32_t value) |
1078 |
|
|
{ |
1079 |
|
|
void *wdc0 = ((struct symphony_82c105_extra *)pd->extra)->wdc0; |
1080 |
|
|
void *wdc1 = ((struct symphony_82c105_extra *)pd->extra)->wdc1; |
1081 |
|
|
int enabled = 0; |
1082 |
|
|
|
1083 |
|
|
printf("reg = 0x%x\n", reg); |
1084 |
|
|
switch (reg) { |
1085 |
|
|
case PCI_COMMAND_STATUS_REG: |
1086 |
|
|
if (value & PCI_COMMAND_IO_ENABLE) |
1087 |
|
|
enabled = 1; |
1088 |
|
|
printf(" value = 0x%"PRIx32"\n", value); |
1089 |
|
|
if (wdc0 != NULL) |
1090 |
|
|
wdc_set_io_enabled(wdc0, enabled); |
1091 |
|
|
if (wdc1 != NULL) |
1092 |
|
|
wdc_set_io_enabled(wdc1, enabled); |
1093 |
|
|
/* Set all bits: */ |
1094 |
|
|
PCI_SET_DATA(reg, value); |
1095 |
|
|
return 1; |
1096 |
|
|
case PCI_MAPREG_START: |
1097 |
|
|
case PCI_MAPREG_START + 4: |
1098 |
|
|
case PCI_MAPREG_START + 8: |
1099 |
|
|
case PCI_MAPREG_START + 12: |
1100 |
|
|
case PCI_MAPREG_START + 16: |
1101 |
|
|
case PCI_MAPREG_START + 20: |
1102 |
|
|
PCI_SET_DATA(reg, value); |
1103 |
|
|
return 1; |
1104 |
|
|
} |
1105 |
|
|
|
1106 |
|
|
return 0; |
1107 |
|
|
} |
1108 |
|
|
|
1109 |
dpavlin |
20 |
PCIINIT(symphony_82c105) |
1110 |
|
|
{ |
1111 |
|
|
char tmpstr[100]; |
1112 |
|
|
|
1113 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_SYMPHONY, |
1114 |
|
|
PCI_PRODUCT_SYMPHONY_82C105)); |
1115 |
|
|
|
1116 |
|
|
/* Possibly not correct: */ |
1117 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE, |
1118 |
|
|
PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x05); |
1119 |
|
|
|
1120 |
dpavlin |
32 |
/* TODO: Interrupt line: */ |
1121 |
|
|
/* PCI_SET_DATA(PCI_INTERRUPT_REG, 0x28140000); */ |
1122 |
|
|
|
1123 |
dpavlin |
20 |
/* APO_IDECONF */ |
1124 |
|
|
/* channel 0 and 1 enabled */ |
1125 |
|
|
PCI_SET_DATA(0x40, 0x00000003); |
1126 |
|
|
|
1127 |
dpavlin |
44 |
CHECK_ALLOCATION(pd->extra = |
1128 |
|
|
malloc(sizeof(struct symphony_82c105_extra))); |
1129 |
dpavlin |
32 |
((struct symphony_82c105_extra *)pd->extra)->wdc0 = NULL; |
1130 |
|
|
((struct symphony_82c105_extra *)pd->extra)->wdc1 = NULL; |
1131 |
|
|
|
1132 |
dpavlin |
20 |
if (diskimage_exist(machine, 0, DISKIMAGE_IDE) || |
1133 |
|
|
diskimage_exist(machine, 1, DISKIMAGE_IDE)) { |
1134 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s." |
1135 |
|
|
"isa.%i", (long long)(pd->pcibus->isa_portbase + 0x1f0), |
1136 |
|
|
pd->pcibus->irq_path_isa, 14); |
1137 |
dpavlin |
32 |
((struct symphony_82c105_extra *)pd->extra)->wdc0 = |
1138 |
|
|
device_add(machine, tmpstr); |
1139 |
dpavlin |
20 |
} |
1140 |
|
|
|
1141 |
|
|
if (diskimage_exist(machine, 2, DISKIMAGE_IDE) || |
1142 |
|
|
diskimage_exist(machine, 3, DISKIMAGE_IDE)) { |
1143 |
dpavlin |
34 |
snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%s." |
1144 |
|
|
"isa.%i", (long long)(pd->pcibus->isa_portbase + 0x170), |
1145 |
|
|
pd->pcibus->irq_path_isa, 15); |
1146 |
dpavlin |
32 |
((struct symphony_82c105_extra *)pd->extra)->wdc1 = |
1147 |
|
|
device_add(machine, tmpstr); |
1148 |
dpavlin |
20 |
} |
1149 |
dpavlin |
32 |
|
1150 |
|
|
pd->cfg_reg_write = symphony_82c105_cfg_reg_write; |
1151 |
dpavlin |
20 |
} |
1152 |
|
|
|
1153 |
|
|
|
1154 |
|
|
|
1155 |
|
|
/* |
1156 |
dpavlin |
40 |
* Realtek 8139C+ PCI ethernet. |
1157 |
|
|
*/ |
1158 |
|
|
|
1159 |
|
|
#define PCI_VENDOR_REALTEK 0x10ec |
1160 |
|
|
#define PCI_PRODUCT_REALTEK_RT8139 0x8139 |
1161 |
|
|
|
1162 |
|
|
PCIINIT(rtl8139c) |
1163 |
|
|
{ |
1164 |
|
|
uint64_t port, memaddr; |
1165 |
|
|
int pci_int_line = 0x101, irq = 0; |
1166 |
|
|
char irqstr[200]; |
1167 |
|
|
char tmpstr[200]; |
1168 |
|
|
|
1169 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_REALTEK, |
1170 |
|
|
PCI_PRODUCT_REALTEK_RT8139)); |
1171 |
|
|
|
1172 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_NETWORK, |
1173 |
|
|
PCI_SUBCLASS_NETWORK_ETHERNET, 0x00) + 0x20); |
1174 |
|
|
|
1175 |
|
|
switch (machine->machine_type) { |
1176 |
|
|
case MACHINE_LANDISK: |
1177 |
|
|
irq = 5; |
1178 |
|
|
pci_int_line = 0x105; |
1179 |
|
|
break; |
1180 |
|
|
default:fatal("rtl8139c for this machine has not been " |
1181 |
|
|
"implemented yet\n"); |
1182 |
|
|
exit(1); |
1183 |
|
|
} |
1184 |
|
|
|
1185 |
|
|
PCI_SET_DATA(PCI_INTERRUPT_REG, 0x28140000 | pci_int_line); |
1186 |
|
|
|
1187 |
|
|
allocate_device_space(pd, 0x100, 0, &port, &memaddr); |
1188 |
|
|
|
1189 |
|
|
snprintf(irqstr, sizeof(irqstr), "%s.%i", |
1190 |
|
|
pd->pcibus->irq_path_pci, irq); |
1191 |
|
|
|
1192 |
|
|
snprintf(tmpstr, sizeof(tmpstr), "rtl8139c addr=0x%llx " |
1193 |
|
|
"irq=%s pci_little_endian=1", (long long)port, irqstr); |
1194 |
|
|
|
1195 |
|
|
device_add(machine, tmpstr); |
1196 |
|
|
} |
1197 |
|
|
|
1198 |
|
|
|
1199 |
|
|
|
1200 |
|
|
/* |
1201 |
dpavlin |
20 |
* DEC 21143 ("Tulip") PCI ethernet. |
1202 |
|
|
*/ |
1203 |
|
|
|
1204 |
|
|
#define PCI_VENDOR_DEC 0x1011 /* Digital Equipment */ |
1205 |
|
|
#define PCI_PRODUCT_DEC_21142 0x0019 /* DECchip 21142/21143 10/100 Ethernet */ |
1206 |
|
|
|
1207 |
|
|
PCIINIT(dec21143) |
1208 |
|
|
{ |
1209 |
|
|
uint64_t port, memaddr; |
1210 |
dpavlin |
34 |
int pci_int_line = 0x101, irq = 0, isa = 0; |
1211 |
|
|
char irqstr[200]; |
1212 |
dpavlin |
20 |
char tmpstr[200]; |
1213 |
|
|
|
1214 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_DEC, |
1215 |
|
|
PCI_PRODUCT_DEC_21142)); |
1216 |
|
|
|
1217 |
|
|
PCI_SET_DATA(PCI_COMMAND_STATUS_REG, 0x02000017); |
1218 |
|
|
|
1219 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_NETWORK, |
1220 |
|
|
PCI_SUBCLASS_NETWORK_ETHERNET, 0x00) + 0x41); |
1221 |
|
|
|
1222 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, PCI_BHLC_CODE(0,0,0, 0x40,0)); |
1223 |
|
|
|
1224 |
|
|
switch (machine->machine_type) { |
1225 |
|
|
case MACHINE_CATS: |
1226 |
dpavlin |
22 |
/* CATS int 18 = PCI. */ |
1227 |
dpavlin |
20 |
irq = 18; |
1228 |
dpavlin |
22 |
pci_int_line = 0x101; |
1229 |
dpavlin |
20 |
break; |
1230 |
dpavlin |
22 |
case MACHINE_COBALT: |
1231 |
|
|
/* On Cobalt, IRQ 7 = PCI. */ |
1232 |
|
|
irq = 8 + 7; |
1233 |
|
|
pci_int_line = 0x407; |
1234 |
|
|
break; |
1235 |
dpavlin |
20 |
case MACHINE_PREP: |
1236 |
dpavlin |
34 |
irq = 10; |
1237 |
|
|
isa = 1; |
1238 |
dpavlin |
22 |
pci_int_line = 0x20a; |
1239 |
dpavlin |
20 |
break; |
1240 |
dpavlin |
22 |
case MACHINE_MVMEPPC: |
1241 |
|
|
/* TODO */ |
1242 |
dpavlin |
34 |
irq = 10; |
1243 |
dpavlin |
22 |
pci_int_line = 0x40a; |
1244 |
|
|
break; |
1245 |
dpavlin |
20 |
case MACHINE_PMPPC: |
1246 |
dpavlin |
22 |
/* TODO, not working yet */ |
1247 |
dpavlin |
42 |
irq = 31 - CPC_IB_EXT1; |
1248 |
|
|
pci_int_line = 0x101; |
1249 |
dpavlin |
20 |
break; |
1250 |
dpavlin |
22 |
case MACHINE_MACPPC: |
1251 |
|
|
/* TODO, not working yet */ |
1252 |
|
|
irq = 25; |
1253 |
|
|
pci_int_line = 0x101; |
1254 |
|
|
break; |
1255 |
dpavlin |
20 |
} |
1256 |
|
|
|
1257 |
dpavlin |
22 |
PCI_SET_DATA(PCI_INTERRUPT_REG, 0x28140000 | pci_int_line); |
1258 |
dpavlin |
20 |
|
1259 |
|
|
allocate_device_space(pd, 0x100, 0x100, &port, &memaddr); |
1260 |
|
|
|
1261 |
dpavlin |
34 |
if (isa) |
1262 |
|
|
snprintf(irqstr, sizeof(irqstr), "%s.isa.%i", |
1263 |
|
|
pd->pcibus->irq_path_isa, irq); |
1264 |
|
|
else |
1265 |
|
|
snprintf(irqstr, sizeof(irqstr), "%s.%i", |
1266 |
|
|
pd->pcibus->irq_path_pci, irq); |
1267 |
|
|
|
1268 |
dpavlin |
20 |
snprintf(tmpstr, sizeof(tmpstr), "dec21143 addr=0x%llx addr2=0x%llx " |
1269 |
dpavlin |
34 |
"irq=%s pci_little_endian=1", (long long)port, |
1270 |
|
|
(long long)memaddr, irqstr); |
1271 |
|
|
|
1272 |
dpavlin |
20 |
device_add(machine, tmpstr); |
1273 |
|
|
} |
1274 |
|
|
|
1275 |
|
|
|
1276 |
|
|
|
1277 |
|
|
/* |
1278 |
|
|
* DEC 21030 "tga" graphics. |
1279 |
|
|
*/ |
1280 |
|
|
|
1281 |
|
|
#define PCI_PRODUCT_DEC_21030 0x0004 /* DECchip 21030 ("TGA") */ |
1282 |
|
|
|
1283 |
|
|
PCIINIT(dec21030) |
1284 |
|
|
{ |
1285 |
|
|
uint64_t base = 0; |
1286 |
|
|
char tmpstr[200]; |
1287 |
|
|
|
1288 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_DEC, |
1289 |
|
|
PCI_PRODUCT_DEC_21030)); |
1290 |
|
|
|
1291 |
|
|
PCI_SET_DATA(PCI_COMMAND_STATUS_REG, 0x02800087); /* TODO */ |
1292 |
|
|
|
1293 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_DISPLAY, |
1294 |
|
|
PCI_SUBCLASS_DISPLAY_VGA, 0x00) + 0x03); |
1295 |
|
|
|
1296 |
|
|
/* |
1297 |
|
|
* See http://mail-index.netbsd.org/port-arc/2001/08/13/0000.html |
1298 |
|
|
* for more info. |
1299 |
|
|
*/ |
1300 |
|
|
|
1301 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, 0x0000ff00); |
1302 |
|
|
|
1303 |
|
|
/* 8 = prefetchable */ |
1304 |
|
|
PCI_SET_DATA(0x10, 0x00000008); |
1305 |
|
|
PCI_SET_DATA(0x30, 0x08000001); |
1306 |
|
|
PCI_SET_DATA(PCI_INTERRUPT_REG, 0x00000100); /* interrupt pin A? */ |
1307 |
|
|
|
1308 |
|
|
/* |
1309 |
|
|
* Experimental: |
1310 |
|
|
* |
1311 |
|
|
* TODO: Base address, pci_little_endian, ... |
1312 |
|
|
*/ |
1313 |
|
|
|
1314 |
|
|
switch (machine->machine_type) { |
1315 |
|
|
case MACHINE_ARC: |
1316 |
|
|
base = 0x100000000ULL; |
1317 |
|
|
break; |
1318 |
|
|
default:fatal("dec21030 in non-implemented machine type %i\n", |
1319 |
|
|
machine->machine_type); |
1320 |
|
|
exit(1); |
1321 |
|
|
} |
1322 |
|
|
|
1323 |
|
|
snprintf(tmpstr, sizeof(tmpstr), "dec21030 addr=0x%llx", |
1324 |
|
|
(long long)(base)); |
1325 |
|
|
device_add(machine, tmpstr); |
1326 |
|
|
} |
1327 |
|
|
|
1328 |
|
|
|
1329 |
dpavlin |
22 |
|
1330 |
dpavlin |
20 |
/* |
1331 |
|
|
* Motorola MPC105 "Eagle" Host Bridge |
1332 |
|
|
* |
1333 |
|
|
* Used in at least PReP and BeBox. |
1334 |
|
|
*/ |
1335 |
|
|
|
1336 |
|
|
#define PCI_VENDOR_MOT 0x1057 |
1337 |
|
|
#define PCI_PRODUCT_MOT_MPC105 0x0001 |
1338 |
|
|
|
1339 |
|
|
PCIINIT(eagle) |
1340 |
|
|
{ |
1341 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_MOT, |
1342 |
|
|
PCI_PRODUCT_MOT_MPC105)); |
1343 |
|
|
|
1344 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
1345 |
|
|
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x24); |
1346 |
|
|
|
1347 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
1348 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
1349 |
|
|
} |
1350 |
|
|
|
1351 |
dpavlin |
22 |
|
1352 |
|
|
|
1353 |
|
|
/* |
1354 |
|
|
* Apple (MacPPC) stuff: |
1355 |
|
|
* |
1356 |
|
|
* Grand Central (I/O controller) |
1357 |
|
|
* Uni-North (PCI controller) |
1358 |
|
|
*/ |
1359 |
|
|
|
1360 |
|
|
#define PCI_VENDOR_APPLE 0x106b |
1361 |
|
|
#define PCI_PRODUCT_APPLE_GC 0x0002 |
1362 |
|
|
#define PCI_PRODUCT_APPLE_UNINORTH1 0x001e |
1363 |
|
|
|
1364 |
|
|
PCIINIT(gc_obio) |
1365 |
|
|
{ |
1366 |
|
|
uint64_t port, memaddr; |
1367 |
|
|
|
1368 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_APPLE, |
1369 |
|
|
PCI_PRODUCT_APPLE_GC)); |
1370 |
|
|
|
1371 |
|
|
/* TODO: */ |
1372 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_SYSTEM, |
1373 |
|
|
PCI_SUBCLASS_SYSTEM_PIC, 0) + 0x00); |
1374 |
|
|
|
1375 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
1376 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
1377 |
|
|
|
1378 |
|
|
/* TODO */ |
1379 |
|
|
allocate_device_space(pd, 0x10000, 0x10000, &port, &memaddr); |
1380 |
|
|
} |
1381 |
|
|
|
1382 |
|
|
PCIINIT(uninorth) |
1383 |
|
|
{ |
1384 |
|
|
uint64_t port, memaddr; |
1385 |
|
|
|
1386 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_APPLE, |
1387 |
|
|
PCI_PRODUCT_APPLE_UNINORTH1)); |
1388 |
|
|
|
1389 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE, |
1390 |
|
|
PCI_SUBCLASS_BRIDGE_HOST, 0) + 0xff); |
1391 |
|
|
|
1392 |
|
|
PCI_SET_DATA(PCI_BHLC_REG, |
1393 |
|
|
PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0)); |
1394 |
|
|
|
1395 |
|
|
/* TODO */ |
1396 |
|
|
allocate_device_space(pd, 0x10000, 0x10000, &port, &memaddr); |
1397 |
|
|
} |
1398 |
|
|
|
1399 |
|
|
|
1400 |
|
|
|
1401 |
|
|
/* |
1402 |
|
|
* ATI graphics cards |
1403 |
|
|
*/ |
1404 |
|
|
|
1405 |
|
|
#define PCI_VENDOR_ATI 0x1002 |
1406 |
|
|
#define PCI_PRODUCT_ATI_RADEON_9200_2 0x5962 |
1407 |
|
|
|
1408 |
|
|
PCIINIT(ati_radeon_9200_2) |
1409 |
|
|
{ |
1410 |
|
|
uint64_t port, memaddr; |
1411 |
|
|
|
1412 |
|
|
PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_ATI, |
1413 |
|
|
PCI_PRODUCT_ATI_RADEON_9200_2)); |
1414 |
|
|
|
1415 |
|
|
/* TODO: other subclass? */ |
1416 |
|
|
PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_DISPLAY, |
1417 |
|
|
PCI_SUBCLASS_DISPLAY_VGA, 0) + 0x03); |
1418 |
|
|
|
1419 |
|
|
/* TODO */ |
1420 |
|
|
allocate_device_space(pd, 0x1000, 0x400000, &port, &memaddr); |
1421 |
|
|
} |
1422 |
|
|
|